dotnet_load - 載入一個 DOTNET 模組

II. Apache

apache_child_terminate - 在本次請求結束後終止 apache 進程
apache_get_modules - Get a list of loaded Apache modules
apache_get_version - Fetch Apache version
apache_getenv - Get an Apache subprocess_env variable
apache_lookup_uri - 對指定的 URI 執行部分請求並返回所有有關內容
apache_note - 取得或設定 apache 請求記錄
apache_request_headers - Fetch all HTTP request headers
apache_reset_timeout - Reset the Apache write timer
apache_response_headers - Fetch all HTTP response headers
apache_setenv - Set an Apache subprocess_env variable
ascii2ebcdic - Translate string from ASCII to EBCDIC
ebcdic2ascii - Translate string from EBCDIC to ASCII
getallheaders - Fetch all HTTP request headers
virtual - Perform an Apache sub-request

III. APC

apc_cache_info - Retrieves cached information (and meta-data) from APC's data store
apc_clear_cache - Clears the APC cache
apc_define_constants - Defines a set of constants for later retrieval and mass-definition
apc_delete - Removes a stored variable from the cache
apc_fetch - Fetch a stored variable from the cache
apc_load_constants - Loads a set of constants from the cache
apc_sma_info - Retrieves APC's Shared Memory Allocation information
apc_store - Cache a variable in the data store

IV. APD

apd_breakpoint - Stops the interpreter and waits on a CR from the socket
apd_callstack - Returns the current call stack as an array
apd_clunk - Throw a warning and a callstack
apd_continue - Restarts the interpreter
apd_croak - Throw an error, a callstack and then exit
apd_dump_function_table - Outputs the current function table
apd_dump_persistent_resources - Return all persistent resources as an array
apd_dump_regular_resources - Return all current regular resources as an array
apd_echo - Echo to the debugging socket
apd_get_active_symbols - Get an array of the current variables names in the local scope
apd_set_pprof_trace - Starts the session debugging
apd_set_session_trace - Starts the session debugging
apd_set_session - Changes or sets the current debugging level
apd_set_socket_session_trace - Starts the remote session debugging
override_function - Overrides built-in functions
rename_function - Renames orig_name to new_name in the global function_table

V. Arrays

array_change_key_case - 返回字符串鍵名全為小寫或大寫的陣列
array_chunk - 將一個陣列分割成多個
array_combine - 建立一個陣列，用一個陣列的值作為其鍵名，另一個陣列的值作為其值
array_count_values - 統計陣列中所有的值出現的次數
array_diff_assoc - 帶索引檢查計算陣列的差集
array_diff_key - 使用鍵名比較計算陣列的差集
array_diff_uassoc - 用會員提供的回調函數做索引檢查來計算陣列的差集
array_diff_ukey - 用回調函數對鍵名比較計算陣列的差集
array_diff - 計算陣列的差集
array_fill - 用給定的值填充陣列
array_filter - 用回調函數過濾陣列中的單元
array_flip - 交換陣列中的鍵和值
array_intersect_assoc - 帶索引檢查計算陣列的交集
array_intersect_key - 使用鍵名比較計算陣列的交集
array_intersect_uassoc - 帶索引檢查計算陣列的交集，用回調函數比較索引
array_intersect_ukey - 用回調函數比較鍵名來計算陣列的交集
array_intersect - 計算陣列的交集
array_key_exists - 檢查給定的鍵名或索引是否存在於陣列中
array_keys - 返回陣列中所有的鍵名
array_map - 將回調函數作用到給定陣列的單元上
array_merge_recursive - 遞歸地合併一個或多個陣列
array_merge - 合併一個或多個陣列
array_multisort - 對多個陣列或多維陣列進行排序
array_pad - 用值將陣列填補到指定長度
array_pop - 將陣列最後一個單元彈出（出棧）
array_product - 計算陣列中所有值的乘積
array_push - 將一個或多個單元壓入陣列的末尾（入棧）
array_rand - 從陣列中隨機取出一個或多個單元
array_reduce - 用回調函數迭代地將陣列簡化為單一的值
array_reverse - 返回一個單元順序相反的陣列
array_search - 在陣列中搜尋給定的值，如果成功則返回相應的鍵名
array_shift - 將陣列開頭的單元移出陣列
array_slice - 從陣列中取出一段
array_splice - 把陣列中的一部分去掉並用其它值取代
array_sum - 計算陣列中所有值的和
array_udiff_assoc - 帶索引檢查計算陣列的差集，用回調函數比較資料
array_udiff_uassoc - 帶索引檢查計算陣列的差集，用回調函數比較資料和索引
array_udiff - 用回調函數比較資料來計算陣列的差集
array_uintersect_assoc - 帶索引檢查計算陣列的交集，用回調函數比較資料
array_uintersect_uassoc - 帶索引檢查計算陣列的交集，用回調函數比較資料和索引
array_uintersect - 計算陣列的交集，用回調函數比較資料
array_unique - 移除陣列中重複的值
array_unshift - 在陣列開頭插入一個或多個單元
array_values - 返回陣列中所有的值
array_walk_recursive - 對陣列中的每個成員遞歸地應用會員函數
array_walk - 對陣列中的每個成員應用會員函數
array - 新建一個陣列
arsort - 對陣列進行逆向排序並保持索引關係
asort - 對陣列進行排序並保持索引關係
compact - 建立一個陣列，包括變數名和它們的值
count - 計算陣列中的單元數目或物件中的屬性個數
current - 返回陣列中的目前單元
each - 返回陣列中目前的鍵／值對並將陣列指針向前移動一步
end - 將陣列的內部指針指向最後一個單元
extract - 從陣列中將變數導入到目前的符號表
in_array - 檢查陣列中是否存在某個值
key - 從關聯陣列中取得鍵名
krsort - 對陣列按照鍵名逆向排序
ksort - 對陣列按照鍵名排序
list - 把陣列中的值賦給一些變數
natcasesort - 用「自然排序」算法對陣列進行不區分大小寫字母的排序
natsort - 用「自然排序」算法對陣列排序
next - 將陣列中的內部指針向前移動一位
pos - current 的別名
prev - 將陣列的內部指針倒回一位
range - 建立一個包含指定範圍單元的陣列
reset - 將陣列的內部指針指向第一個單元
rsort - 對陣列逆向排序
shuffle - 將陣列打亂
sizeof - count 的別名
sort - 對陣列排序
uasort - 使用會員自訂的比較函數對陣列中的值進行排序並保持索引關聯
uksort - 使用會員自訂的比較函數對陣列中的鍵名進行排序
usort - 使用會員自訂的比較函數對陣列中的值進行排序

VI. Aspell

aspell_check_raw - Check a word without changing its case or trying to trim it [deprecated]
aspell_check - Check a word [deprecated]
aspell_new - Load a new dictionary [deprecated]
aspell_suggest - Suggest spellings of a word [deprecated]

VII. BC math

bcadd - Add two arbitrary precision numbers
bccomp - Compare two arbitrary precision numbers
bcdiv - Divide two arbitrary precision numbers
bcmod - Get modulus of an arbitrary precision number
bcmul - Multiply two arbitrary precision number
bcpow - Raise an arbitrary precision number to another
bcpowmod - Raise an arbitrary precision number to another, reduced by a specified modulus
bcscale - Set default scale parameter for all bc math functions
bcsqrt - Get the square root of an arbitrary precision number
bcsub - Subtract one arbitrary precision number from another

VIII. bcompiler

bcompiler_load_exe - Reads and creates classes from a bcompiler exe file
bcompiler_load - Reads and creates classes from a bz compressed file
bcompiler_parse_class - Reads the bytecodes of a class and calls back to a user function
bcompiler_read - Reads and creates classes from a filehandle
bcompiler_write_class - Writes an defined class as bytecodes
bcompiler_write_constant - Writes a defined constant as bytecodes
bcompiler_write_exe_footer - Writes the start pos, and sig to the end of a exe type file
bcompiler_write_file - Writes a php source file as bytecodes
bcompiler_write_footer - Writes the single character \x00 to indicate End of compiled data
bcompiler_write_function - Writes an defined function as bytecodes
bcompiler_write_functions_from_file - Writes all functions defined in a file as bytecodes
bcompiler_write_header - Writes the bcompiler header

IX. Bzip2

bzclose - Close a bzip2 file
bzcompress - Compress a string into bzip2 encoded data
bzdecompress - Decompresses bzip2 encoded data
bzerrno - Returns a bzip2 error number
bzerror - Returns the bzip2 error number and error string in an array
bzerrstr - Returns a bzip2 error string
bzflush - Force a write of all buffered data
bzopen - Opens a bzip2 compressed file
bzread - Binary safe bzip2 file read
bzwrite - Binary safe bzip2 file write

X. Calendar

cal_days_in_month - Return the number of days in a month for a given year and calendar
cal_from_jd - Converts from Julian Day Count to a supported calendar
cal_info - Returns information about a particular calendar
cal_to_jd - Converts from a supported calendar to Julian Day Count
easter_date - Get Unix timestamp for midnight on Easter of a given year
easter_days - Get number of days after March 21 on which Easter falls for a given year
FrenchToJD - Converts a date from the French Republican Calendar to a Julian Day Count
GregorianToJD - Converts a Gregorian date to Julian Day Count
JDDayOfWeek - Returns the day of the week
JDMonthName - Returns a month name
JDToFrench - Converts a Julian Day Count to the French Republican Calendar
JDToGregorian - Converts Julian Day Count to Gregorian date
jdtojewish - Converts a Julian day count to a Jewish calendar date
JDToJulian - Converts a Julian Day Count to a Julian Calendar Date
jdtounix - Convert Julian Day to Unix timestamp
JewishToJD - Converts a date in the Jewish Calendar to Julian Day Count
JulianToJD - Converts a Julian Calendar date to Julian Day Count
unixtojd - Convert Unix timestamp to Julian Day

XI. CCVS

ccvs_add - Add data to a transaction
ccvs_auth - Perform credit authorization test on a transaction
ccvs_command - Performs a command which is peculiar to a single protocol, and thus is not available in the general CCVS API
ccvs_count - Find out how many transactions of a given type are stored in the system
ccvs_delete - Delete a transaction
ccvs_done - Terminate CCVS engine and do cleanup work
ccvs_init - Initialize CCVS for use
ccvs_lookup - Look up an item of a particular type in the database #
ccvs_new - Create a new, blank transaction
ccvs_report - Return the status of the background communication process
ccvs_return - Transfer funds from the merchant to the credit card holder
ccvs_reverse - Perform a full reversal on an already-processed authorization
ccvs_sale - Transfer funds from the credit card holder to the merchant
ccvs_status - Check the status of an invoice
ccvs_textvalue - Get text return value for previous function call
ccvs_void - Perform a full reversal on a completed transaction

XII. Classes/Objects

call_user_method_array - 調用一個會員方法，同時傳遞參數陣列（已廢棄）
call_user_method - 對特定物件調用會員方法（已廢棄）
class_exists - 檢查類是否已定義
get_class_methods - 返回由類的方法名組成的陣列
get_class_vars - 返回由類的預設屬性組成的陣列
get_class - 返回對象的類名
get_declared_classes - 返回由已定義類的名字所組成的陣列
get_declared_interfaces - Returns an array of all declared interfaces
get_object_vars - 返回由物件屬性組成的關聯陣列
get_parent_class - 返回物件或類的父類名
interface_exists - Checks if the interface has been defined
is_a - 如果物件屬於該類或該類是此對象的父類則返回 TRUE
is_subclass_of - 如果此對象是該類的子類，則返回 TRUE
method_exists - 檢查類的方法是否存在
property_exists - Checks if the object or class has a property

XIII. Classkit

classkit_import - Import new class method definitions from a file
classkit_method_add - Dynamically adds a new method to a given class
classkit_method_copy - Copies a method from class to another
classkit_method_redefine - Dynamically changes the code of the given method
classkit_method_remove - Dynamically removes the given method
classkit_method_rename - Dynamically changes the name of the given method

XIV. ClibPDF

cpdf_add_annotation - Adds annotation
cpdf_add_outline - Adds bookmark for current page
cpdf_arc - Draws an arc
cpdf_begin_text - Starts text section
cpdf_circle - Draw a circle
cpdf_clip - Clips to current path
cpdf_close - Closes the pdf document
cpdf_closepath_fill_stroke - Close, fill and stroke current path
cpdf_closepath_stroke - Close path and draw line along path
cpdf_closepath - Close path
cpdf_continue_text - Output text in next line
cpdf_curveto - Draws a curve
cpdf_end_text - Ends text section
cpdf_fill_stroke - Fill and stroke current path
cpdf_fill - Fill current path
cpdf_finalize_page - Ends page
cpdf_finalize - Ends document
cpdf_global_set_document_limits - Sets document limits for any pdf document
cpdf_import_jpeg - Opens a JPEG image
cpdf_lineto - Draws a line
cpdf_moveto - Sets current point
cpdf_newpath - Starts a new path
cpdf_open - Opens a new pdf document
cpdf_output_buffer - Outputs the pdf document in memory buffer
cpdf_page_init - Starts new page
cpdf_place_inline_image - Places an image on the page
cpdf_rect - Draw a rectangle
cpdf_restore - Restores formerly saved environment
cpdf_rlineto - Draws a line
cpdf_rmoveto - Sets current point
cpdf_rotate_text - Sets text rotation angle
cpdf_rotate - Sets rotation
cpdf_save_to_file - Writes the pdf document into a file
cpdf_save - Saves current environment
cpdf_scale - Sets scaling
cpdf_set_action_url - Sets hyperlink
cpdf_set_char_spacing - Sets character spacing
cpdf_set_creator - Sets the creator field in the pdf document
cpdf_set_current_page - Sets current page
cpdf_set_font_directories - Sets directories to search when using external fonts
cpdf_set_font_map_file - Sets fontname to filename translation map when using external fonts
cpdf_set_font - Select the current font face and size
cpdf_set_horiz_scaling - Sets horizontal scaling of text
cpdf_set_keywords - Sets the keywords field of the pdf document
cpdf_set_leading - Sets distance between text lines
cpdf_set_page_animation - Sets duration between pages
cpdf_set_subject - Sets the subject field of the pdf document
cpdf_set_text_matrix - Sets the text matrix
cpdf_set_text_pos - Sets text position
cpdf_set_text_rendering - Determines how text is rendered
cpdf_set_text_rise - Sets the text rise
cpdf_set_title - Sets the title field of the pdf document
cpdf_set_viewer_preferences - How to show the document in the viewer
cpdf_set_word_spacing - Sets spacing between words
cpdf_setdash - Sets dash pattern
cpdf_setflat - Sets flatness
cpdf_setgray_fill - Sets filling color to gray value
cpdf_setgray_stroke - Sets drawing color to gray value
cpdf_setgray - Sets drawing and filling color to gray value
cpdf_setlinecap - Sets linecap parameter
cpdf_setlinejoin - Sets linejoin parameter
cpdf_setlinewidth - Sets line width
cpdf_setmiterlimit - Sets miter limit
cpdf_setrgbcolor_fill - Sets filling color to rgb color value
cpdf_setrgbcolor_stroke - Sets drawing color to rgb color value
cpdf_setrgbcolor - Sets drawing and filling color to rgb color value
cpdf_show_xy - Output text at position
cpdf_show - Output text at current position
cpdf_stringwidth - Returns width of text in current font
cpdf_stroke - Draw line along path
cpdf_text - Output text with parameters
cpdf_translate - Sets origin of coordinate system

XV. COM

COM - COM 類
DOTNET - DOTNET class
VARIANT - VARIANT 類
com_addref - 增加組件引用計數。[被廢棄]
com_create_guid - Generate a globally unique identifier (GUID)
com_event_sink - Connect events from a COM object to a PHP object
com_get_active_object - Returns a handle to an already running instance of a COM object
com_get - 取得 COM 組件的屬性值 [被廢棄]
com_invoke - 調用 COM 組件的方法。
com_isenum - 取得一個 IEnumVariant
com_load_typelib - 載入一個 Typelib
com_load - 建立新的 COM 組件的引用
com_message_pump - Process COM messages, sleeping for up to timeoutms milliseconds
com_print_typeinfo - Print out a PHP class definition for a dispatchable interface
com_propget - com_get 的別名
com_propput - com_set 的別名
com_propset - com_set 的別名
com_release - 減少組件引用計數。[被廢棄]
com_set - 給 COM 組件的屬性賦值
variant_abs - Returns the absolute value of a variant
variant_add - "Adds" two variant values together and returns the result
variant_and - performs a bitwise AND operation between two variants and returns the result
variant_cast - Convert a variant into a new variant object of another type
variant_cat - concatenates two variant values together and returns the result
variant_cmp - Compares two variants
variant_date_from_timestamp - Returns a variant date representation of a unix timestamp
variant_date_to_timestamp - Converts a variant date/time value to unix timestamp
variant_div - Returns the result from dividing two variants
variant_eqv - Performs a bitwise equivalence on two variants
variant_fix - Returns the integer portion ? of a variant
variant_get_type - Returns the type of a variant object
variant_idiv - Converts variants to integers and then returns the result from dividing them
variant_imp - Performs a bitwise implication on two variants
variant_int - Returns the integer portion of a variant
variant_mod - Divides two variants and returns only the remainder
variant_mul - multiplies the values of the two variants and returns the result
variant_neg - Performs logical negation on a variant
variant_not - Performs bitwise not negation on a variant
variant_or - Performs a logical disjunction on two variants
variant_pow - Returns the result of performing the power function with two variants
variant_round - Rounds a variant to the specified number of decimal places
variant_set_type - Convert a variant into another type "in-place"
variant_set - Assigns a new value for a variant object
variant_sub - subtracts the value of the right variant from the left variant value and returns the result
variant_xor - Performs a logical exclusion on two variants

XVI. Crack

crack_check - Performs an obscure check with the given password
crack_closedict - Closes an open CrackLib dictionary
crack_getlastmessage - Returns the message from the last obscure check
crack_opendict - Opens a new CrackLib dictionary

XVII. ctype

ctype_alnum - Check for alphanumeric character(s)
ctype_alpha - Check for alphabetic character(s)
ctype_cntrl - Check for control character(s)
ctype_digit - Check for numeric character(s)
ctype_graph - Check for any printable character(s) except space
ctype_lower - Check for lowercase character(s)
ctype_print - Check for printable character(s)
ctype_punct - Check for any printable character which is not whitespace or an alphanumeric character
ctype_space - Check for whitespace character(s)
ctype_upper - Check for uppercase character(s)
ctype_xdigit - Check for character(s) representing a hexadecimal digit

XVIII. CURL

curl_close - Close a CURL session
curl_copy_handle - Copy a cURL handle along with all of its preferences
curl_errno - Return the last error number
curl_error - Return a string containing the last error for the current session
curl_exec - Perform a CURL session
curl_getinfo - Get information regarding a specific transfer
curl_init - Initialize a CURL session
curl_multi_add_handle - Add a normal cURL handle to a cURL multi handle
curl_multi_close - Close a set of cURL handles
curl_multi_exec - Run the sub-connections of the current cURL handle
curl_multi_getcontent - Return the content of a cURL handle if CURLOPT_RETURNTRANSFER is set
curl_multi_info_read - Get information about the current transfers
curl_multi_init - Returns a new cURL multi handle
curl_multi_remove_handle - Remove a multi handle from a set of cURL handles
curl_multi_select - Get all the sockets associated with the cURL extension, which can then be "selected"
curl_setopt - Set an option for a CURL transfer
curl_version - Return the current CURL version

XIX. Cybercash

cybercash_base64_decode - base64 decode data for Cybercash
cybercash_base64_encode - base64 encode data for Cybercash
cybercash_decr - Cybercash decrypt
cybercash_encr - Cybercash encrypt

XX. CyberMUT

cybermut_creerformulairecm - Generate HTML form of request for payment
cybermut_creerreponsecm - Generate the delivery's acknowledgement of the payment's confirmation
cybermut_testmac - Make sure that there was no data diddling contained in the received message of confirmation

XXI. Cyrus IMAP

cyrus_authenticate - Authenticate against a Cyrus IMAP server
cyrus_bind - Bind callbacks to a Cyrus IMAP connection
cyrus_close - Close connection to a Cyrus IMAP server
cyrus_connect - Connect to a Cyrus IMAP server
cyrus_query - Send a query to a Cyrus IMAP server
cyrus_unbind - Unbind ...

XXII. Date/Time

checkdate - 驗證一個格裡高裡日期
date_default_timezone_get - 取得一個腳本中所有日期時間函數所使用的預設時區
date_default_timezone_set - 設定用於一個腳本中所有日期時間函數的預設時區
date_sunrise - 返回給定的日期與地點的日出時間
date_sunset - 返回給定的日期與地點的日落時間
date - 格式化一個本地時間／日期
getdate - 取得日期／時間內容
gettimeofday - 取得目前時間
gmdate - 格式化一個 GMT/UTC 日期／時間
gmmktime - 取得 GMT 日期的 UNIX 時間戳
gmstrftime - 根據區域設定格式化 GMT/UTC 時間／日期
idate - 將本地時間日期格式化為整數
localtime - 取得本地時間
microtime - 返回目前 Unix 時間戳和微秒數
mktime - 取得一個日期的 Unix 時間戳
strftime - 根據區域設定格式化本地時間／日期
strptime - 解析由 strftime 建立的日期／時間
strtotime - 將任何英文文字的日期時間描述解析為 Unix 時間戳
time - 返回目前的 Unix 時間戳

XXIII. DB++

dbplus_add - Add a tuple to a relation
dbplus_aql - Perform AQL query
dbplus_chdir - Get/Set database virtual current directory
dbplus_close - Close a relation
dbplus_curr - Get current tuple from relation
dbplus_errcode - Get error string for given errorcode or last error
dbplus_errno - Get error code for last operation
dbplus_find - Set a constraint on a relation
dbplus_first - Get first tuple from relation
dbplus_flush - Flush all changes made on a relation
dbplus_freealllocks - Free all locks held by this client
dbplus_freelock - Release write lock on tuple
dbplus_freerlocks - Free all tuple locks on given relation
dbplus_getlock - Get a write lock on a tuple
dbplus_getunique - Get an id number unique to a relation
dbplus_info - Get information about a relation
dbplus_last - Get last tuple from relation
dbplus_lockrel - Request write lock on relation
dbplus_next - Get next tuple from relation
dbplus_open - Open relation file
dbplus_prev - Get previous tuple from relation
dbplus_rchperm - Change relation permissions
dbplus_rcreate - Creates a new DB++ relation
dbplus_rcrtexact - Creates an exact but empty copy of a relation including indices
dbplus_rcrtlike - Creates an empty copy of a relation with default indices
dbplus_resolve - Resolve host information for relation
dbplus_restorepos - Restore position
dbplus_rkeys - Specify new primary key for a relation
dbplus_ropen - Open relation file local
dbplus_rquery - Perform local (raw) AQL query
dbplus_rrename - Rename a relation
dbplus_rsecindex - Create a new secondary index for a relation
dbplus_runlink - Remove relation from filesystem
dbplus_rzap - Remove all tuples from relation
dbplus_savepos - Save position
dbplus_setindex - Set index
dbplus_setindexbynumber - Set index by number
dbplus_sql - Perform SQL query
dbplus_tcl - Execute TCL code on server side
dbplus_tremove - Remove tuple and return new current tuple
dbplus_undo - Undo
dbplus_undoprepare - Prepare undo
dbplus_unlockrel - Give up write lock on relation
dbplus_unselect - Remove a constraint from relation
dbplus_update - Update specified tuple in relation
dbplus_xlockrel - Request exclusive lock on relation
dbplus_xunlockrel - Free exclusive lock on relation

XXIV. dba

dba_close - Close a DBA database
dba_delete - Delete DBA entry specified by key
dba_exists - Check whether key exists
dba_fetch - Fetch data specified by key
dba_firstkey - Fetch first key
dba_handlers - List all the handlers available
dba_insert - Insert entry
dba_key_split - Splits a key in string representation into array representation
dba_list - List all open database files
dba_nextkey - Fetch next key
dba_open - Open database
dba_optimize - Optimize database
dba_popen - Open database persistently
dba_replace - Replace or insert entry
dba_sync - Synchronize database

XXV. dBase

dbase_add_record - Adds a record to a database
dbase_close - Closes a database
dbase_create - Creates a database
dbase_delete_record - Deletes a record from a database
dbase_get_header_info - Gets the header info of a database
dbase_get_record_with_names - Gets a record from a database as an associative array
dbase_get_record - Gets a record from a database as an indexed array
dbase_numfields - Gets the number of fields of a database
dbase_numrecords - Gets the number of records in a database
dbase_open - Opens a database
dbase_pack - Packs a database
dbase_replace_record - Replaces a record in a database

XXVI. DBM

dblist - Describes the DBM-compatible library being used
dbmclose - Closes a dbm database
dbmdelete - Deletes the value for a key from a DBM database
dbmexists - Tells if a value exists for a key in a DBM database
dbmfetch - Fetches a value for a key from a DBM database
dbmfirstkey - Retrieves the first key from a DBM database
dbminsert - Inserts a value for a key in a DBM database
dbmnextkey - Retrieves the next key from a DBM database
dbmopen - Opens a DBM database
dbmreplace - Replaces the value for a key in a DBM database

XXVII. dbx

dbx_close - Close an open connection/database
dbx_compare - Compare two rows for sorting purposes
dbx_connect - Open a connection/database
dbx_error - Report the error message of the latest function call in the module (not just in the connection)
dbx_escape_string - Escape a string so it can safely be used in an sql-statement
dbx_fetch_row - Fetches rows from a query-result that had the DBX_RESULT_UNBUFFERED flag set
dbx_query - Send a query and fetch all results (if any)
dbx_sort - Sort a result from a dbx_query by a custom sort function

XXVIII. Direct IO

dio_close - Closes the file descriptor given by fd
dio_fcntl - Performs a c library fcntl on fd
dio_open - Opens a new filename with specified permissions of flags and creation permissions of mode
dio_read - Reads bytes from a file descriptor
dio_seek - Seeks to pos on fd from whence
dio_stat - Gets stat information about the file descriptor fd
dio_tcsetattr - Sets terminal attributes and baud rate for a serial port
dio_truncate - Truncates file descriptor fd to offset bytes
dio_write - Writes data to fd with optional truncation at length

XXIX. Directories

chdir - 改變目錄
chroot - 改變根目錄
dir - directory 類
closedir - 關閉目錄句柄
getcwd - 取得目前工作目錄
opendir - 打開目錄句柄
readdir - 從目錄句柄中讀取條目
rewinddir - 倒回目錄句柄
scandir - 列出指定路徑中的檔案和目錄

XXX. DOM

DOMAttr->__construct() - Creates a new DOMAttr object
DOMAttr->isId() - Checks if attribute is a defined ID
DOMCharacterData->appendData() - Append the string to the end of the character data of the node
DOMCharacterData->deleteData() - Remove a range of characters from the node
DOMCharacterData->insertData() - Insert a string at the specified 16-bit unit offset
DOMCharacterData->replaceData() - Replace a substring within the DOMCharacterData node
DOMCharacterData->substringData() - Extracts a range of data from the node
DOMComment->__construct() - Creates a new DOMComment object
DOMDocument->__construct() - Creates a new DOMDocument object
DOMDocument->createAttribute() - Create new attribute
DOMDocument->createAttributeNS() - Create new attribute node with an associated namespace
DOMDocument->createCDATASection() - Create new cdata node
DOMDocument->createComment() - Create new comment node
DOMDocument->createDocumentFragment() - Create new document fragment
DOMDocument->createElement() - Create new element node
DOMDocument->createElementNS() - Create new element node with an associated namespace
DOMDocument->createEntityReference() - Create new entity reference node
DOMDocument->createProcessingInstruction() - Creates new PI node
DOMDocument->createTextNode() - Create new text node
DOMDocument->getElementById() - Searches for an element with a certain id
DOMDocument->getElementsByTagName() - Searches for all elements with given tag name
DOMDocument->getElementsByTagNameNS() - Searches for all elements with given tag name in specified namespace
DOMDocument->importNode() - Import node into current document
DOMDocument->load() - Load XML from a file
DOMDocument->loadHTML() - Load HTML from a string
DOMDocument->loadHTMLFile() - Load HTML from a file
DOMDocument->loadXML() - Load XML from a string
DOMDocument->normalize() - Normalizes the document
DOMDocument->relaxNGValidate() - Performs relaxNG validation on the document
DOMDocument->relaxNGValidateSource() - Performs relaxNG validation on the document
DOMDocument->save() - Dumps the internal XML tree back into a file
DOMDocument->saveHTML() - Dumps the internal document into a string using HTML formatting
DOMDocument->saveHTMLFile() - Dumps the internal document into a file using HTML formatting
DOMDocument->saveXML() - Dumps the internal XML tree back into a string
DOMDocument->schemaValidate() - Validates a document based on a schema
DOMDocument->schemaValidateSource() - Validates a document based on a schema
DOMDocument->validate() - Validates the document based on its DTD
DOMDocument->xinclude() - Substitutes XIncludes in a DOMDocument Object
DOMElement->__construct() - Creates a new DOMElement object
DOMElement->getAttribute() - Returns value of attribute
DOMElement->getAttributeNode() - Returns attribute node
DOMElement->getAttributeNodeNS() - Returns attribute node
DOMElement->getAttributeNS() - Returns value of attribute
DOMElement->getElementsByTagName() - Gets elements by tagname
DOMElement->getElementsByTagNameNS() - Get elements by namespaceURI and localName
DOMElement->hasAttribute() - Checks to see if attribute exists
DOMElement->hasAttributeNS() - Checks to see if attribute exists
DOMElement->removeAttribute() - Removes attribute
DOMElement->removeAttributeNode() - Removes attribute
DOMElement->removeAttributeNS() - Removes attribute
DOMElement->setAttribute() - Adds new attribute
DOMElement->setAttributeNode() - Adds new attribute node to element
DOMElement->setAttributeNodeNS() - Adds new attribute node to element
DOMElement->setAttributeNS() - Adds new attribute
DOMEntityReference->__construct() - Creates a new DOMEntityReference object
DOMImplementation->__construct() - Creates a new DOMImplementation object
DOMImplementation->createDocument() - Creates a DOMDocument object of the specified type with its document element
DOMImplementation->createDocumentType() - Creates an empty DOMDocumentType object
DOMImplementation->hasFeature() - Test if the DOM implementation implements a specific feature
DOMNamedNodeMap->getNamedItem() - Retrieves a node specified by name
DOMNamedNodeMap->getNamedItemNS() - Retrieves a node specified by local name and namespace URI
DOMNamedNodeMap->item() - Retrieves a node specified by index
DOMNode->appendChild() - Adds new child at the end of the children
DOMNode->cloneNode() - Clones a node
DOMNode->hasAttributes() - Checks if node has attributes
DOMNode->hasChildNodes() - Checks if node has children
DOMNode->insertBefore() - Adds a new child before a reference node
DOMNode->isSameNode() - Indicates if two nodes are the same node
DOMNode->isSupported() - Checks if feature is supported for specified version
DOMNode->lookupNamespaceURI() - Gets the namespace URI of the node based on the prefix
DOMNode->lookupPrefix() - Gets the namespace prefix of the node based on the namespace URI
DOMNode->normalize() - Normalizes the node
DOMNode->removeChild() - Removes child from list of children
DOMNode->replaceChild() - Replaces a child
DOMNodelist->item() - Retrieves a node specified by index
DOMProcessingInstruction->__construct() - Creates a new DOMProcessingInstruction object
DOMText->__construct() - Creates a new DOMText object
DOMText->isWhitespaceInElementContent() - Indicates whether this text node contains whitespace
DOMText->splitText() - Breaks this node into two nodes at the specified offset
DOMXPath->__construct() - Creates a new DOMXPath object
DOMXPath->evaluate() - Evaluates the given XPath expression and returns a typed result if possible.
DOMXPath->query() - Evaluates the given XPath expression
DOMXPath->registerNamespace() - Registers the namespace with the DOMXPath object
dom_import_simplexml - Gets a DOMElement object from a SimpleXMLElement object

XXXI. DOM XML

DomAttribute->name - Returns the name of attribute
DomAttribute->set_value - Sets the value of an attribute
DomAttribute->specified - Checks if attribute is specified
DomAttribute->value - Returns value of attribute
DomDocument->add_root - Adds a root node [deprecated]
DomDocument->create_attribute - Create new attribute
DomDocument->create_cdata_section - Create new cdata node
DomDocument->create_comment - Create new comment node
DomDocument->create_element_ns - Create new element node with an associated namespace
DomDocument->create_element - Create new element node
DomDocument->create_entity_reference - Create an entity reference
DomDocument->create_processing_instruction - Creates new PI node
DomDocument->create_text_node - Create new text node
DomDocument->doctype - Returns the document type
DomDocument->document_element - Returns root element node
DomDocument->dump_file - Dumps the internal XML tree back into a file
DomDocument->dump_mem - Dumps the internal XML tree back into a string
DomDocument->get_element_by_id - Searches for an element with a certain id
DomDocument->get_elements_by_tagname - Returns array with nodes with given tagname in document or empty array, if not found
DomDocument->html_dump_mem - Dumps the internal XML tree back into a string as HTML
DomDocument->xinclude - Substitutes XIncludes in a DomDocument Object
DomDocumentType->entities() - Returns list of entities
DomDocumentType->internal_subset() - Returns internal subset
DomDocumentType->name() - Returns name of document type
DomDocumentType->notations() - Returns list of notations
DomDocumentType->public_id() - Returns public id of document type
DomDocumentType->system_id() - Returns the system id of document type
DomElement->get_attribute_node() - Returns the node of the given attribute
DomElement->get_attribute() - Returns the value of the given attribute
DomElement->get_elements_by_tagname() - Gets elements by tagname
DomElement->has_attribute() - Checks to see if an attribute exists in the current node
DomElement->remove_attribute() - Removes attribute
DomElement->set_attribute() - Sets the value of an attribute
DomElement->tagname() - Returns the name of the current element
DomNode->add_namespace - Adds a namespace declaration to a node
DomNode->append_child - Adds a new child at the end of the children
DomNode->append_sibling - Adds new sibling to a node
DomNode->attributes - Returns list of attributes
DomNode->child_nodes - Returns children of node
DomNode->clone_node - Clones a node
DomNode->dump_node - Dumps a single node
DomNode->first_child - Returns first child of node
DomNode->get_content - Gets content of node
DomNode->has_attributes - Checks if node has attributes
DomNode->has_child_nodes - Checks if node has children
DomNode->insert_before - Inserts new node as child
DomNode->is_blank_node - Checks if node is blank
DomNode->last_child - Returns last child of node
DomNode->next_sibling - Returns the next sibling of node
DomNode->node_name - Returns name of node
DomNode->node_type - Returns type of node
DomNode->node_value - Returns value of a node
DomNode->owner_document - Returns the document this node belongs to
DomNode->parent_node - Returns the parent of the node
DomNode->prefix - Returns name space prefix of node
DomNode->previous_sibling - Returns the previous sibling of node
DomNode->remove_child - Removes child from list of children
DomNode->replace_child - Replaces a child
DomNode->replace_node - Replaces node
DomNode->set_content - Sets content of node
DomNode->set_name - Sets name of node
DomNode->set_namespace - Sets namespace of a node
DomNode->unlink_node - Deletes node
DomProcessingInstruction->data - Returns the data of ProcessingInstruction node
DomProcessingInstruction->target - Returns the target of a ProcessingInstruction node
DomXsltStylesheet->process() - Applies the XSLT-Transformation on a DomDocument Object
DomXsltStylesheet->result_dump_file() - Dumps the result from a XSLT-Transformation into a file
DomXsltStylesheet->result_dump_mem() - Dumps the result from a XSLT-Transformation back into a string
domxml_new_doc - Creates new empty XML document
domxml_open_file - Creates a DOM object from an XML file
domxml_open_mem - Creates a DOM object of an XML document
domxml_version - Gets the XML library version
domxml_xmltree - Creates a tree of PHP objects from an XML document
domxml_xslt_stylesheet_doc - Creates a DomXsltStylesheet Object from a DomDocument Object
domxml_xslt_stylesheet_file - Creates a DomXsltStylesheet Object from an XSL document in a file
domxml_xslt_stylesheet - Creates a DomXsltStylesheet object from an XSL document in a string
domxml_xslt_version - Gets the XSLT library version
xpath_eval_expression - Evaluates the XPath Location Path in the given string
xpath_eval - Evaluates the XPath Location Path in the given string
xpath_new_context - Creates new xpath context
xpath_register_ns_auto - Register the given namespace in the passed XPath context
xpath_register_ns - Register the given namespace in the passed XPath context
xptr_eval - Evaluate the XPtr Location Path in the given string
xptr_new_context - Create new XPath Context

XXXII. Errors and Logging

debug_backtrace - Generates a backtrace
debug_print_backtrace - Prints a backtrace
error_log - Send an error message somewhere
error_reporting - Sets which PHP errors are reported
restore_error_handler - Restores the previous error handler function
restore_exception_handler - Restores the previously defined exception handler function
set_error_handler - Sets a user-defined error handler function
set_exception_handler - Sets a user-defined exception handler function
trigger_error - Generates a user-level error/warning/notice message
user_error - Alias of trigger_error

XXXIII. Exif

exif_imagetype - 判斷一個圖像的類型
exif_read_data - 從 JPEG 或 TIFF 檔案中讀取 EXIF 頭內容
exif_tagname - Get the header name for an index
exif_thumbnail - 取得嵌入在 TIFF 或 JPEG 圖像中的縮略圖
read_exif_data - exif_read_data 的別名

XXXIV. Expect

expect_expectl - Waits until the output from a process matches one of the patterns, a specified time period has passed, or an EOF is seen
expect_popen - Exectute command via Bourne shell, and open the PTY stream to the process

XXXV. fam

fam_cancel_monitor - Terminate monitoring
fam_close - Close FAM connection
fam_monitor_collection - Monitor a collection of files in a directory for changes
fam_monitor_directory - Monitor a directory for changes
fam_monitor_file - Monitor a regular file for changes
fam_next_event - Get next pending FAM event
fam_open - Open connection to FAM daemon
fam_pending - Check for pending FAM events
fam_resume_monitor - Resume suspended monitoring
fam_suspend_monitor - Temporarily suspend monitoring

XXXVI. FDF

fdf_add_doc_javascript - Adds javascript code to the FDF document
fdf_add_template - Adds a template into the FDF document
fdf_close - Close an FDF document
fdf_create - Create a new FDF document
fdf_enum_values - Call a user defined function for each document value
fdf_errno - Return error code for last fdf operation
fdf_error - Return error description for fdf error code
fdf_get_ap - Get the appearance of a field
fdf_get_attachment - Extracts uploaded file embedded in the FDF
fdf_get_encoding - Get the value of the /Encoding key
fdf_get_file - Get the value of the /F key
fdf_get_flags - Gets the flags of a field
fdf_get_opt - Gets a value from the opt array of a field
fdf_get_status - Get the value of the /STATUS key
fdf_get_value - Get the value of a field
fdf_get_version - Gets version number for FDF API or file
fdf_header - Sets FDF-specific output headers
fdf_next_field_name - Get the next field name
fdf_open_string - Read a FDF document from a string
fdf_open - Open a FDF document
fdf_remove_item - Sets target frame for form
fdf_save_string - Returns the FDF document as a string
fdf_save - Save a FDF document
fdf_set_ap - Set the appearance of a field
fdf_set_encoding - Sets FDF character encoding
fdf_set_file - Set PDF document to display FDF data in
fdf_set_flags - Sets a flag of a field
fdf_set_javascript_action - Sets an javascript action of a field
fdf_set_on_import_javascript - Adds javascript code to be executed when Acrobat opens the FDF
fdf_set_opt - Sets an option of a field
fdf_set_status - Set the value of the /STATUS key
fdf_set_submit_form_action - Sets a submit form action of a field
fdf_set_target_frame - Set target frame for form display
fdf_set_value - Set the value of a field
fdf_set_version - Sets version number for a FDF file

XXXVII. filePro

filepro_fieldcount - Find out how many fields are in a filePro database
filepro_fieldname - Gets the name of a field
filepro_fieldtype - Gets the type of a field
filepro_fieldwidth - Gets the width of a field
filepro_retrieve - Retrieves data from a filePro database
filepro_rowcount - Find out how many rows are in a filePro database
filepro - Read and verify the map file

XXXVIII. Filesystem

basename - 返回路徑中的檔案名部分
chgrp - 改變檔案所屬的組
chmod - 改變檔案模式
chown - 改變檔案的所有者
clearstatcache - 清除檔案狀態暫存
copy - 拷貝檔案
delete - 參見 unlink 或 unset
dirname - 返回路徑中的目錄部分
disk_free_space - 返回目錄中的可用空間
disk_total_space - 返回一個目錄的磁盤總大小
diskfreespace - disk_free_space 的別名
fclose - 關閉一個已打開的檔案指針
feof - 測試檔案指針是否到了檔案結束的位置
fflush - 將緩衝內容輸出到檔案
fgetc - 從檔案指針中讀取字符
fgetcsv - 從檔案指針中讀入一行並解析 CSV 字段
fgets - 從檔案指針中讀取一行
fgetss - 從檔案指針中讀取一行並過濾掉 HTML 標記
file_exists - 檢查檔案或目錄是否存在
file_get_contents - 將整個檔案讀入一個字符串
file_put_contents - 將一個字符串寫入檔案
file - 把整個檔案讀入一個陣列中
fileatime - 取得檔案的上次訪問時間
filectime - 取得檔案的 inode 修改時間
filegroup - 取得檔案的組
fileinode - 取得檔案的 inode
filemtime - 取得檔案修改時間
fileowner - 取得檔案的所有者
fileperms - 取得檔案的權限
filesize - 取得檔案大小
filetype - 取得檔案類型
flock - 輕便的咨詢檔案鎖定
fnmatch - 用模式匹配檔案名
fopen - 打開檔案或者 URL
fpassthru - 輸出檔案指針處的所有剩餘資料
fputcsv - 將行格式化為 CSV 並寫入檔案指針
fputs - fwrite 的別名
fread - 讀取檔案（可安全用於二進制檔案）
fscanf - 從檔案中格式化輸入
fseek - 在檔案指針中定位
fstat - 通過已打開的檔案指針取得檔案內容
ftell - 返回檔案指針讀/寫的位置
ftruncate - 將檔案截斷到給定的長度
fwrite - 寫入檔案（可安全用於二進制檔案）
glob - 尋找與模式匹配的檔案路徑
is_dir - 判斷給定檔案名是否是一個目錄
is_executable - 判斷給定檔案名是否可執行
is_file - 判斷給定檔案名是否為一個正常的檔案
is_link - 判斷給定檔案名是否為一個符號連接
is_readable - 判斷給定檔案名是否可讀
is_uploaded_file - 判斷檔案是否是通過 HTTP POST 上傳的
is_writable - 判斷給定的檔案名是否可寫
is_writeable - is_writable 的別名
link - 建立一個硬連接
linkinfo - 取得一個連接的內容
lstat - 給出一個檔案或符號連接的內容
mkdir - 新建目錄
move_uploaded_file - 將上傳的檔案移動到新位置
parse_ini_file - 解析一個配置檔案
pathinfo - 返回檔案路徑的內容
pclose - 關閉進程檔案指針
popen - 打開進程檔案指針
readfile - 輸出一個檔案
readlink - 返回符號連接指向的目標
realpath - 返回規範化的絕對路徑名
rename - 重命名一個檔案或目錄
rewind - 倒回檔案指針的位置
rmdir - 刪除目錄
set_file_buffer - stream_set_write_buffer 的別名
stat - 給出檔案的內容
symlink - 建立符號連接
tempnam - 建立一個具有唯一檔案名的檔案
tmpfile - 建立一個臨時檔案
touch - 設定檔案的訪問和修改時間
umask - 改變目前的 umask
unlink - 刪除檔案

XXXIX. Firebird/InterBase

ibase_add_user - Add a user to a security database (only for IB6 or later)
ibase_affected_rows - Return the number of rows that were affected by the previous query
ibase_backup - Initiates a backup task in the service manager and returns immediately
ibase_blob_add - Add data into a newly created blob
ibase_blob_cancel - Cancel creating blob
ibase_blob_close - Close blob
ibase_blob_create - Create a new blob for adding data
ibase_blob_echo - Output blob contents to browser
ibase_blob_get - Get len bytes data from open blob
ibase_blob_import - Create blob, copy file in it, and close it
ibase_blob_info - Return blob length and other useful info
ibase_blob_open - Open blob for retrieving data parts
ibase_close - Close a connection to an InterBase database
ibase_commit_ret - Commit a transaction without closing it
ibase_commit - Commit a transaction
ibase_connect - Open a connection to an InterBase database
ibase_db_info - Request statistics about a database
ibase_delete_user - Delete a user from a security database (only for IB6 or later)
ibase_drop_db - Drops a database
ibase_errcode - Return an error code
ibase_errmsg - Return error messages
ibase_execute - Execute a previously prepared query
ibase_fetch_assoc - Fetch a result row from a query as an associative array
ibase_fetch_object - Get an object from a InterBase database
ibase_fetch_row - Fetch a row from an InterBase database
ibase_field_info - Get information about a field
ibase_free_event_handler - Cancels a registered event handler
ibase_free_query - Free memory allocated by a prepared query
ibase_free_result - Free a result set
ibase_gen_id - Increments the named generator and returns its new value
ibase_maintain_db - Execute a maintenance command on the database server
ibase_modify_user - Modify a user to a security database (only for IB6 or later)
ibase_name_result - Assigns a name to a result set
ibase_num_fields - Get the number of fields in a result set
ibase_num_params - Return the number of parameters in a prepared query
ibase_param_info - Return information about a parameter in a prepared query
ibase_pconnect - Open a persistent connection to an InterBase database
ibase_prepare - Prepare a query for later binding of parameter placeholders and execution
ibase_query - Execute a query on an InterBase database
ibase_restore - Initiates a restore task in the service manager and returns immediately
ibase_rollback_ret - Roll back a transaction without closing it
ibase_rollback - Roll back a transaction
ibase_server_info - Request information about a database server
ibase_service_attach - Connect to the service manager
ibase_service_detach - Disconnect from the service manager
ibase_set_event_handler - Register a callback function to be called when events are posted
ibase_timefmt - Sets the format of timestamp, date and time type columns returned from queries
ibase_trans - Begin a transaction
ibase_wait_event - Wait for an event to be posted by the database

XL. Firebird/Interbase (PDO)

PDO_FIREBIRD DSN - Connecting to Firebird and Interbase databases

XLI. FriBiDi

fribidi_log2vis - Convert a logical string to a visual one

XLII. FrontBase

fbsql_affected_rows - Get number of affected rows in previous FrontBase operation
fbsql_autocommit - Enable or disable autocommit
fbsql_blob_size - Get the size of a BLOB
fbsql_change_user - Change logged in user of the active connection
fbsql_clob_size - Get the size of a CLOB
fbsql_close - Close FrontBase connection
fbsql_commit - Commits a transaction to the database
fbsql_connect - Open a connection to a FrontBase Server
fbsql_create_blob - Create a BLOB
fbsql_create_clob - Create a CLOB
fbsql_create_db - Create a FrontBase database
fbsql_data_seek - Move internal result pointer
fbsql_database_password - Sets or retrieves the password for a FrontBase database
fbsql_database - Get or set the database name used with a connection
fbsql_db_query - Send a FrontBase query
fbsql_db_status - Get the status for a given database
fbsql_drop_db - Drop (delete) a FrontBase database
fbsql_errno - Returns the numerical value of the error message from previous FrontBase operation
fbsql_error - Returns the text of the error message from previous FrontBase operation
fbsql_fetch_array - Fetch a result row as an associative array, a numeric array, or both
fbsql_fetch_assoc - Fetch a result row as an associative array
fbsql_fetch_field - Get column information from a result and return as an object
fbsql_fetch_lengths - Get the length of each output in a result
fbsql_fetch_object - Fetch a result row as an object
fbsql_fetch_row - Get a result row as an enumerated array
fbsql_field_flags - Get the flags associated with the specified field in a result
fbsql_field_len - Returns the length of the specified field
fbsql_field_name - Get the name of the specified field in a result
fbsql_field_seek - Set result pointer to a specified field offset
fbsql_field_table - Get name of the table the specified field is in
fbsql_field_type - Get the type of the specified field in a result
fbsql_free_result - Free result memory
fbsql_get_autostart_info - No description given yet
fbsql_hostname - Get or set the host name used with a connection
fbsql_insert_id - Get the id generated from the previous INSERT operation
fbsql_list_dbs - List databases available on a FrontBase server
fbsql_list_fields - List FrontBase result fields
fbsql_list_tables - List tables in a FrontBase database
fbsql_next_result - Move the internal result pointer to the next result
fbsql_num_fields - Get number of fields in result
fbsql_num_rows - Get number of rows in result
fbsql_password - Get or set the user password used with a connection
fbsql_pconnect - Open a persistent connection to a FrontBase Server
fbsql_query - Send a FrontBase query
fbsql_read_blob - Read a BLOB from the database
fbsql_read_clob - Read a CLOB from the database
fbsql_result - Get result data
fbsql_rollback - Rollback a transaction to the database
fbsql_select_db - Select a FrontBase database
fbsql_set_lob_mode - Set the LOB retrieve mode for a FrontBase result set
fbsql_set_password - Change the password for a given user
fbsql_set_transaction - Set the transaction locking and isolation
fbsql_start_db - Start a database on local or remote server
fbsql_stop_db - Stop a database on local or remote server
fbsql_tablename - Get table name of field
fbsql_username - Get or set the host user used with a connection
fbsql_warnings - Enable or disable FrontBase warnings

XLIII. FTP

ftp_alloc - Allocates space for a file to be uploaded
ftp_cdup - 切換到目前目錄的父目錄
ftp_chdir - 在 FTP 伺服器上切換目前目錄
ftp_chmod - Set permissions on a file via FTP
ftp_close - 關閉一個活動的 FTP 連接
ftp_connect - 建立一個新的 FTP 連接
ftp_delete - 刪除 FTP 伺服器上的一個檔案
ftp_exec - 請求運行一條 FTP 命令
ftp_fget - 從 FTP 伺服器上下載一個檔案並儲存到本地一個已經打開的檔案中
ftp_fput - 上傳一個已經打開的檔案到 FTP 伺服器
ftp_get_option - 返回目前 FTP 連接的各種不同的選項設定
ftp_get - 從 FTP 伺服器上下載一個檔案
ftp_login - 登入 FTP 伺服器
ftp_mdtm - 返回指定檔案的最後修改時間
ftp_mkdir - 建立新目錄
ftp_nb_continue - 連續取得／發送檔案（non-blocking）
ftp_nb_fget - Retrieves a file from the FTP server and writes it to an open file (non-blocking)
ftp_nb_fput - Stores a file from an open file to the FTP server (non-blocking)
ftp_nb_get - 從 FTP 伺服器上取得檔案並寫入本地檔案（non-blocking）
ftp_nb_put - 存儲一個檔案至 FTP 伺服器（non-blocking）
ftp_nlist - 返回給定目錄的檔案列表
ftp_pasv - 返回目前 FTP 被動模式是否打開
ftp_put - 上傳檔案到 FTP 伺服器
ftp_pwd - 返回目前目錄名
ftp_quit - ftp_close 的別名
ftp_raw - Sends an arbitrary command to an FTP server
ftp_rawlist - 返回指定目錄下檔案的詳細列表
ftp_rename - 更改 FTP 伺服器上指定的檔案名
ftp_rmdir - 刪除一個目錄
ftp_set_option - 設定各種 FTP 運行時選項
ftp_site - 向伺服器發送 SITE 命令
ftp_size - 返回指定檔案的大小
ftp_ssl_connect - Opens an Secure SSL-FTP connection
ftp_systype - 返回遠程 FTP 伺服器的系統類型

XLIV. Function handling

call_user_func_array - Call a user function given with an array of parameters
call_user_func - Call a user function given by the first parameter
create_function - Create an anonymous (lambda-style) function
func_get_arg - Return an item from the argument list
func_get_args - Returns an array comprising a function's argument list
func_num_args - Returns the number of arguments passed to the function
function_exists - Return TRUE if the given function has been defined
get_defined_functions - Returns an array of all defined functions
register_shutdown_function - Register a function for execution on shutdown
register_tick_function - Register a function for execution on each tick
unregister_tick_function - De-register a function for execution on each tick

XLV. gettext

bind_textdomain_codeset - Specify the character encoding in which the messages from the DOMAIN message catalog will be returned
bindtextdomain - Sets the path for a domain
dcgettext - Overrides the domain for a single lookup
dcngettext - Plural version of dcgettext
dgettext - Override the current domain
dngettext - Plural version of dgettext
gettext - Lookup a message in the current domain
ngettext - Plural version of gettext
textdomain - Sets the default domain

XLVI. GMP

gmp_abs - Absolute value
gmp_add - Add numbers
gmp_and - Logical AND
gmp_clrbit - Clear bit
gmp_cmp - Compare numbers
gmp_com - Calculates one's complement
gmp_div_q - Divide numbers
gmp_div_qr - Divide numbers and get quotient and remainder
gmp_div_r - Remainder of the division of numbers
gmp_div - 別名 gmp_div_q
gmp_divexact - Exact division of numbers
gmp_fact - Factorial
gmp_gcd - Calculate GCD
gmp_gcdext - Calculate GCD and multipliers
gmp_hamdist - Hamming distance
gmp_init - Create GMP number
gmp_intval - Convert GMP number to integer
gmp_invert - Inverse by modulo
gmp_jacobi - Jacobi symbol
gmp_legendre - Legendre symbol
gmp_mod - Modulo operation
gmp_mul - Multiply numbers
gmp_neg - Negate number
gmp_or - Logical OR
gmp_perfect_square - Perfect square check
gmp_popcount - Population count
gmp_pow - Raise number into power
gmp_powm - Raise number into power with modulo
gmp_prob_prime - Check if number is "probably prime"
gmp_random - Random number
gmp_scan0 - Scan for 0
gmp_scan1 - Scan for 1
gmp_setbit - Set bit
gmp_sign - Sign of number
gmp_sqrt - Calculate square root
gmp_sqrtrem - Square root with remainder
gmp_strval - Convert GMP number to string
gmp_sub - Subtract numbers
gmp_xor - Logical XOR

XLVII. gnupg

gnupg_adddecryptkey - Add a key for decryption
gnupg_addencryptkey - Add a key for encryption
gnupg_addsignkey - Add a key for signing
gnupg_cleardecryptkeys - Removes all keys which were set for decryption before
gnupg_clearencryptkeys - Removes all keys which were set for encryption before
gnupg_clearsignkeys - Removes all keys which were set for signing before
gnupg_decrypt - Decrypts a given text
gnupg_decryptverify - Decrypts and verifies a given text
gnupg_encrypt - Encrypts a given text
gnupg_encryptsign - Encrypts and signs a given text
gnupg_export - Exports a key
gnupg_geterror - Returns the errortext, if a function fails
gnupg_getprotocol - Returns the currently active protocol for all operations
gnupg_import - Imports a key
gnupg_keyinfo - Returns an array with information about all keys that matches the given pattern
gnupg_setarmor - Toggle armored output
gnupg_seterrormode - Sets the mode for error_reporting
gnupg_setsignmode - Sets the mode for signing
gnupg_sign - Signs a given text
gnupg_verify - Verifies a signed text

XLVIII. gopher

gopher_parsedir - Translate a gopher formatted directory entry into an associative array.

XLIX. hash

hash_algos - Return a list of registered hashing algorithms
hash_file - Generate a hash value using the contents of a given file
hash_final - Finalize an incremental hash and return resulting digest
hash_hmac_file - Generate a keyed hash value using the HMAC method and the contents of a given file
hash_hmac - Generate a keyed hash value using the HMAC method
hash_init - Initialize an incremental hashing context
hash_update_file - Pump data into an active hashing context from a file
hash_update_stream - Pump data into an active hashing context from an open stream
hash_update - Pump data into an active hashing context
hash - Generate a hash value (message digest)

L. HTTP

header - 發送一個原始 HTTP 標頭
headers_list - 返回已發送（或準備發送）的響應標頭的列表
headers_sent - 檢查標頭是否已被發送以及在哪裡被發送
setcookie - 發送一個 cookie 內容
setrawcookie - 發送一個其值未經 urlencode 編碼的 cookie

LI. Hyperwave

hw_Array2Objrec - Convert attributes from object array to object record
hw_changeobject - Changes attributes of an object (obsolete)
hw_Children - Object ids of children
hw_ChildrenObj - Object records of children
hw_Close - Closes the Hyperwave connection
hw_Connect - Opens a connection
hw_connection_info - Prints information about the connection to Hyperwave server
hw_cp - Copies objects
hw_Deleteobject - Deletes object
hw_DocByAnchor - Object id object belonging to anchor
hw_DocByAnchorObj - Object record object belonging to anchor
hw_Document_Attributes - Object record of hw_document
hw_Document_BodyTag - Body tag of hw_document
hw_Document_Content - Returns content of hw_document
hw_Document_SetContent - Sets/replaces content of hw_document
hw_Document_Size - Size of hw_document
hw_dummy - Hyperwave dummy function
hw_EditText - Retrieve text document
hw_Error - Error number
hw_ErrorMsg - Returns error message
hw_Free_Document - Frees hw_document
hw_GetAnchors - Object ids of anchors of document
hw_GetAnchorsObj - Object records of anchors of document
hw_GetAndLock - Return object record and lock object
hw_GetChildColl - Object ids of child collections
hw_GetChildCollObj - Object records of child collections
hw_GetChildDocColl - Object ids of child documents of collection
hw_GetChildDocCollObj - Object records of child documents of collection
hw_GetObject - Object record
hw_GetObjectByQuery - Search object
hw_GetObjectByQueryColl - Search object in collection
hw_GetObjectByQueryCollObj - Search object in collection
hw_GetObjectByQueryObj - Search object
hw_GetParents - Object ids of parents
hw_GetParentsObj - Object records of parents
hw_getrellink - Get link from source to dest relative to rootid
hw_GetRemote - Gets a remote document
hw_getremotechildren - Gets children of remote document
hw_GetSrcByDestObj - Returns anchors pointing at object
hw_GetText - Retrieve text document
hw_getusername - Name of currently logged in user
hw_Identify - Identifies as user
hw_InCollections - Check if object ids in collections
hw_Info - Info about connection
hw_InsColl - Insert collection
hw_InsDoc - Insert document
hw_insertanchors - Inserts only anchors into text
hw_InsertDocument - Upload any document
hw_InsertObject - Inserts an object record
hw_mapid - Maps global id on virtual local id
hw_Modifyobject - Modifies object record
hw_mv - Moves objects
hw_New_Document - Create new document
hw_objrec2array - Convert attributes from object record to object array
hw_Output_Document - Prints hw_document
hw_pConnect - Make a persistent database connection
hw_PipeDocument - Retrieve any document
hw_Root - Root object id
hw_setlinkroot - Set the id to which links are calculated
hw_stat - Returns status string
hw_Unlock - Unlock object
hw_Who - List of currently logged in users

LII. Hyperwave API

hw_api_attribute->key - Returns key of the attribute
hw_api_attribute->langdepvalue - Returns value for a given language
hw_api_attribute->value - Returns value of the attribute
hw_api_attribute->values - Returns all values of the attribute
hw_api_attribute - Creates instance of class hw_api_attribute
hw_api->checkin - Checks in an object
hw_api->checkout - Checks out an object
hw_api->children - Returns children of an object
hw_api_content->mimetype - Returns mimetype
hw_api_content->read - Read content
hw_api->content - Returns content of an object
hw_api->copy - Copies physically
hw_api->dbstat - Returns statistics about database server
hw_api->dcstat - Returns statistics about document cache server
hw_api->dstanchors - Returns a list of all destination anchors
hw_api->dstofsrcanchor - Returns destination of a source anchor
hw_api_error->count - Returns number of reasons
hw_api_error->reason - Returns reason of error
hw_api->find - Search for objects
hw_api->ftstat - Returns statistics about fulltext server
hwapi_hgcsp - Returns object of class hw_api
hw_api->hwstat - Returns statistics about Hyperwave server
hw_api->identify - Log into Hyperwave Server
hw_api->info - Returns information about server configuration
hw_api->insert - Inserts a new object
hw_api->insertanchor - Inserts a new object of type anchor
hw_api->insertcollection - Inserts a new object of type collection
hw_api->insertdocument - Inserts a new object of type document
hw_api->link - Creates a link to an object
hw_api->lock - Locks an object
hw_api->move - Moves object between collections
hw_api_content - Create new instance of class hw_api_content
hw_api_object->assign - Clones object
hw_api_object->attreditable - Checks whether an attribute is editable
hw_api_object->count - Returns number of attributes
hw_api_object->insert - Inserts new attribute
hw_api_object - Creates a new instance of class hw_api_object
hw_api_object->remove - Removes attribute
hw_api_object->title - Returns the title attribute
hw_api_object->value - Returns value of attribute
hw_api->object - Retrieve attribute information
hw_api->objectbyanchor - Returns the object an anchor belongs to
hw_api->parents - Returns parents of an object
hw_api_reason->description - Returns description of reason
hw_api_reason->type - Returns type of reason
hw_api->remove - Delete an object
hw_api->replace - Replaces an object
hw_api->setcommittedversion - Commits version other than last version
hw_api->srcanchors - Returns a list of all source anchors
hw_api->srcsofdst - Returns source of a destination object
hw_api->unlock - Unlocks a locked object
hw_api->user - Returns the own user object
hw_api->userlist - Returns a list of all logged in users

LIII. ibm_db2

db2_autocommit - Returns or sets the AUTOCOMMIT state for a database connection
db2_bind_param - Binds a PHP variable to an SQL statement parameter
db2_client_info - Returns an object with properties that describe the DB2 database client
db2_close - Closes a database connection
db2_column_privileges - Returns a result set listing the columns and associated privileges for a table
db2_columns - Returns a result set listing the columns and associated metadata for a table
db2_commit - Commits a transaction
db2_conn_error - Returns a string containing the SQLSTATE returned by the last connection attempt
db2_conn_errormsg - Returns the last connection error message and SQLCODE value
db2_connect - Returns a connection to a database
db2_cursor_type - Returns the cursor type used by a statement resource
db2_exec - Executes an SQL statement directly
db2_execute - Executes a prepared SQL statement
db2_fetch_array - Returns an array, indexed by column position, representing a row in a result set
db2_fetch_assoc - Returns an array, indexed by column name, representing a row in a result set
db2_fetch_both - Returns an array, indexed by both column name and position, representing a row in a result set
db2_fetch_object - Returns an object with properties representing columns in the fetched row
db2_fetch_row - Sets the result set pointer to the next row or requested row
db2_field_display_size - Returns the maximum number of bytes required to display a column
db2_field_name - Returns the name of the column in the result set
db2_field_num - Returns the position of the named column in a result set
db2_field_precision - Returns the precision of the indicated column in a result set
db2_field_scale - Returns the scale of the indicated column in a result set
db2_field_type - Returns the data type of the indicated column in a result set
db2_field_width - Returns the width of the current value of the indicated column in a result set
db2_foreign_keys - Returns a result set listing the foreign keys for a table
db2_free_result - Frees resources associated with a result set
db2_free_stmt - Frees resources associated with the indicated statement resource
db2_next_result - Requests the next result set from a stored procedure
db2_num_fields - Returns the number of fields contained in a result set
db2_num_rows - Returns the number of rows affected by an SQL statement
db2_pconnect - Returns a persistent connection to a database
db2_prepare - Prepares an SQL statement to be executed
db2_primary_keys - Returns a result set listing primary keys for a table
db2_procedure_columns - Returns a result set listing stored procedure parameters
db2_procedures - Returns a result set listing the stored procedures registered in a database
db2_result - Returns a single column from a row in the result set
db2_rollback - Rolls back a transaction
db2_server_info - Returns an object with properties that describe the DB2 database server
db2_special_columns - Returns a result set listing the unique row identifier columns for a table
db2_statistics - Returns a result set listing the index and statistics for a table
db2_stmt_error - Returns a string containing the SQLSTATE returned by an SQL statement
db2_stmt_errormsg - Returns a string containing the last SQL statement error message
db2_table_privileges - Returns a result set listing the tables and associated privileges in a database
db2_tables - Returns a result set listing the tables and associated metadata in a database

LIV. ICAP

icap_close - Close an ICAP stream
icap_create_calendar - Create a new calendar
icap_delete_calendar - Delete a calendar
icap_delete_event - Delete an event from an ICAP calendar
icap_fetch_event - Fetches an event from the calendar stream/
icap_list_alarms - Return a list of events that has an alarm triggered at the given datetime
icap_list_events - Return a list of events between two given datetimes
icap_open - Opens up an ICAP connection
icap_rename_calendar - Rename a calendar
icap_reopen - Reopen ICAP stream to new calendar
icap_snooze - Snooze an alarm
icap_store_event - Store an event into an ICAP calendar

LV. iconv

iconv_get_encoding - Retrieve internal configuration variables of iconv extension
iconv_mime_decode_headers - Decodes multiple MIME header fields at once
iconv_mime_decode - Decodes a MIME header field
iconv_mime_encode - Composes a MIME header field
iconv_set_encoding - Set current setting for character encoding conversion
iconv_strlen - Returns the character count of string
iconv_strpos - Finds position of first occurrence of a needle within a haystack
iconv_strrpos - Finds the last occurrence of a needle within the specified range of haystack
iconv_substr - Cut out part of a string
iconv - Convert string to requested character encoding
ob_iconv_handler - Convert character encoding as output buffer handler

LVI. id3

id3_get_frame_long_name - Get the long name of an ID3v2 frame
id3_get_frame_short_name - Get the short name of an ID3v2 frame
id3_get_genre_id - Get the id for a genre
id3_get_genre_list - Get all possible genre values
id3_get_genre_name - Get the name for a genre id
id3_get_tag - Get all information stored in an ID3 tag
id3_get_version - Get version of an ID3 tag
id3_remove_tag - Remove an existing ID3 tag
id3_set_tag - Update information stored in an ID3 tag

LVII. IIS Functions

iis_add_server - Creates a new virtual web server
iis_get_dir_security - Gets Directory Security
iis_get_script_map - Gets script mapping on a virtual directory for a specific extension
iis_get_server_by_comment - Return the instance number associated with the Comment
iis_get_server_by_path - Return the instance number associated with the Path
iis_get_server_rights - Gets server rights
iis_get_service_state - Returns the state for the service defined by ServiceId
iis_remove_server - Removes the virtual web server indicated by ServerInstance
iis_set_app_settings - Creates application scope for a virtual directory
iis_set_dir_security - Sets Directory Security
iis_set_script_map - Sets script mapping on a virtual directory
iis_set_server_rights - Sets server rights
iis_start_server - Starts the virtual web server
iis_start_service - Starts the service defined by ServiceId
iis_stop_server - Stops the virtual web server
iis_stop_service - Stops the service defined by ServiceId

LVIII. Image

gd_info - 取得目前安裝的 GD 庫的內容
getimagesize - 取得圖像大小
image_type_to_extension - 取得圖像類型的檔案後綴
image_type_to_mime_type - 取得 getimagesize，exif_read_data，exif_thumbnail，exif_imagetype 所返回的圖像類型的 MIME 類型
image2wbmp - 以 WBMP 格式將圖像輸出到瀏覽器或檔案
imagealphablending - 設定圖像的混色模式
imageantialias - 是否使用抗鋸齒（antialias）功能
imagearc - 畫橢圓弧
imagechar - 水平地畫一個字符
imagecharup - 垂直地畫一個字符
imagecolorallocate - 為一幅圖像分配顏色
imagecolorallocatealpha - 為一幅圖像分配顏色 + alpha
imagecolorat - 取得某像素的顏色索引值
imagecolorclosest - 取得與指定的顏色最接近的顏色的索引值
imagecolorclosestalpha - 取得與指定的顏色加透明度最接近的顏色
imagecolorclosesthwb - 取得與給定顏色最接近的色度的黑白色的索引
imagecolordeallocate - 取消圖像顏色的分配
imagecolorexact - 取得指定顏色的索引值
imagecolorexactalpha - 取得指定的顏色加透明度的索引值
imagecolormatch - 使一個圖像中調色板版本的顏色與真彩色版本更能匹配
imagecolorresolve - 取得指定顏色的索引值或有可能得到的最接近的替代值
imagecolorresolvealpha - 取得指定顏色 + alpha 的索引值或有可能得到的最接近的替代值
imagecolorset - 給指定調色板索引設定顏色
imagecolorsforindex - 取得某索引的顏色
imagecolorstotal - 取得一幅圖像的調色板中顏色的數目
imagecolortransparent - 將某個顏色定義為透明色
imageconvolution - 用係數 div 和 offset 申請一個 3x3 的卷積矩陣
imagecopy - 拷貝圖像的一部分
imagecopymerge - 拷貝併合併圖像的一部分
imagecopymergegray - 用灰度拷貝併合併圖像的一部分
imagecopyresampled - 重採樣拷貝部分圖像並調整大小
imagecopyresized - 拷貝部分圖像並調整大小
imagecreate - 新建一個基於調色板的圖像
imagecreatefromgd2 - 從 GD2 檔案或 URL 新建一圖像
imagecreatefromgd2part - 從給定的 GD2 檔案或 URL 中的部分新建一圖像
imagecreatefromgd - 從 GD 檔案或 URL 新建一圖像
imagecreatefromgif - 從 GIF 檔案或 URL 新建一圖像
imagecreatefromjpeg - 從 JPEG 檔案或 URL 新建一圖像
imagecreatefrompng - 從 PNG 檔案或 URL 新建一圖像
imagecreatefromstring - 從字符串中的圖像流新建一圖像
imagecreatefromwbmp - 從 WBMP 檔案或 URL 新建一圖像
imagecreatefromxbm - 從 XBM 檔案或 URL 新建一圖像
imagecreatefromxpm - 從 XPM 檔案或 URL 新建一圖像
imagecreatetruecolor - 新建一個真彩色圖像
imagedashedline - 畫一虛線
imagedestroy - 銷毀一圖像
imageellipse - 畫一個橢圓
imagefill - 區域填充
imagefilledarc - 畫一橢圓弧且填充
imagefilledellipse - 畫一橢圓並填充
imagefilledpolygon - 畫一多邊形並填充
imagefilledrectangle - 畫一矩形並填充
imagefilltoborder - 區域填充到指定顏色的邊界為止
imagefilter - 對圖像使用過濾器
imagefontheight - 取得字體高度
imagefontwidth - 取得字體寬度
imageftbbox - 給出一個使用 FreeType 2 字體的文字框
imagefttext - 使用 FreeType 2 字體將文字寫入圖像
imagegammacorrect - 對 GD 圖像應用 gamma 修正
imagegd2 - 將 GD2 圖像輸出到瀏覽器或檔案
imagegd - 將 GD 圖像輸出到瀏覽器或檔案
imagegif - 以 GIF 格式將圖像輸出到瀏覽器或檔案
imageinterlace - 激活或禁止隔行掃瞄
imageistruecolor - 檢查圖像是否為真彩色圖像
imagejpeg - 以 JPEG 格式將圖像輸出到瀏覽器或檔案
imagelayereffect - 設定 alpha 混色標誌以使用綁定的 libgd 分層效果
imageline - 畫一條線段
imageloadfont - 載入一新字體
imagepalettecopy - 將調色板從一幅圖像拷貝到另一幅
imagepng - 以 PNG 格式將圖像輸出到瀏覽器或檔案
imagepolygon - 畫一個多邊形
imagepsbbox - 給出一個使用 PostScript Type1 字體的文字方框
imagepscopyfont - 拷貝一個已載入的字體以備更改
imagepsencodefont - 改變字體中的字符編碼矢量
imagepsextendfont - 擴充或精簡字體
imagepsfreefont - 釋放一個 PostScript Type 1 字體所佔用的內存
imagepsloadfont - 從檔案中載入一個 PostScript Type 1 字體
imagepsslantfont - 傾斜某字體
imagepstext - 用 PostScript Type1 字體把文字字符串畫在圖像上
imagerectangle - 畫一個矩形
imagerotate - 用給定角度旋轉圖像
imagesavealpha - 設定標記以在儲存 PNG 圖像時儲存完整的 alpha 通道內容（與單一透明色相反）
imagesetbrush - 設定畫線用的畫筆圖像
imagesetpixel - 畫一個單一像素
imagesetstyle - 設定畫線的風格
imagesetthickness - 設定畫線的寬度
imagesettile - 設定用於填充的貼圖
imagestring - 水平地畫一行字符串
imagestringup - 垂直地畫一行字符串
imagesx - 取得圖像寬度
imagesy - 取得圖像高度
imagetruecolortopalette - 將真彩色圖像轉換為調色板圖像
imagettfbbox - 取得使用 TrueType 字體的文字的範圍
imagettftext - 用 TrueType 字體向圖像寫入文字
imagetypes - 返回目前 PHP 版本所支援的圖像類型
imagewbmp - 以 WBMP 格式將圖像輸出到瀏覽器或檔案
imagexbm - 將 XBM 圖像輸出到瀏覽器或檔案
iptcembed - 將二進制 IPTC 資料嵌入到一幅 JPEG 圖像中
iptcparse - 將二進制 IPTC http://www.iptc.org/ 塊解析為單個標記
jpeg2wbmp - 將 JPEG 圖像檔案轉換為 WBMP 圖像檔案
png2wbmp - 將 PNG 圖像檔案轉換為 WBMP 圖像檔案

LIX. IMAP

imap_8bit - Convert an 8bit string to a quoted-printable string
imap_alerts - This function returns all IMAP alert messages (if any) that have occurred during this page request or since the alert stack was reset
imap_append - Append a string message to a specified mailbox
imap_base64 - Decode BASE64 encoded text
imap_binary - Convert an 8bit string to a base64 string
imap_body - Read the message body
imap_bodystruct - Read the structure of a specified body section of a specific message
imap_check - Check current mailbox
imap_clearflag_full - Clears flags on messages
imap_close - Close an IMAP stream
imap_createmailbox - Create a new mailbox
imap_delete - Mark a message for deletion from current mailbox
imap_deletemailbox - Delete a mailbox
imap_errors - This function returns all of the IMAP errors (if any) that have occurred during this page request or since the error stack was reset
imap_expunge - Delete all messages marked for deletion
imap_fetch_overview - Read an overview of the information in the headers of the given message
imap_fetchbody - Fetch a particular section of the body of the message
imap_fetchheader - Returns header for a message
imap_fetchstructure - Read the structure of a particular message
imap_get_quota - Retrieve the quota level settings, and usage statics per mailbox
imap_get_quotaroot - Retrieve the quota settings per user
imap_getacl - Gets the ACL for a given mailbox
imap_getmailboxes - Read the list of mailboxes, returning detailed information on each one
imap_getsubscribed - List all the subscribed mailboxes
imap_header - 別名 imap_headerinfo
imap_headerinfo - Read the header of the message
imap_headers - Returns headers for all messages in a mailbox
imap_last_error - This function returns the last IMAP error (if any) that occurred during this page request
imap_list - Read the list of mailboxes
imap_listmailbox - 別名 imap_list
imap_listscan - Read the list of mailboxes, takes a string to search for in the text of the mailbox
imap_listsubscribed - 別名 imap_lsub
imap_lsub - List all the subscribed mailboxes
imap_mail_compose - Create a MIME message based on given envelope and body sections
imap_mail_copy - Copy specified messages to a mailbox
imap_mail_move - Move specified messages to a mailbox
imap_mail - Send an email message
imap_mailboxmsginfo - Get information about the current mailbox
imap_mime_header_decode - Decode MIME header elements
imap_msgno - This function returns the message sequence number for the given UID
imap_num_msg - Gives the number of messages in the current mailbox
imap_num_recent - Gives the number of recent messages in current mailbox
imap_open - Open an IMAP stream to a mailbox
imap_ping - Check if the IMAP stream is still active
imap_qprint - Convert a quoted-printable string to an 8 bit string
imap_renamemailbox - Rename an old mailbox to new mailbox
imap_reopen - Reopen IMAP stream to new mailbox
imap_rfc822_parse_adrlist - Parses an address string
imap_rfc822_parse_headers - Parse mail headers from a string
imap_rfc822_write_address - Returns a properly formatted email address given the mailbox, host, and personal info
imap_scanmailbox - 別名 imap_listscan
imap_search - This function returns an array of messages matching the given search criteria
imap_set_quota - Sets a quota for a given mailbox
imap_setacl - Sets the ACL for a giving mailbox
imap_setflag_full - Sets flags on messages
imap_sort - Sort an array of message headers
imap_status - This function returns status information on a mailbox other than the current one
imap_subscribe - Subscribe to a mailbox
imap_thread - Returns a tree of threaded message
imap_timeout - Set or fetch imap timeout
imap_uid - This function returns the UID for the given message sequence number
imap_undelete - Unmark the message which is marked deleted
imap_unsubscribe - Unsubscribe from a mailbox
imap_utf7_decode - Decodes a modified UTF-7 encoded string
imap_utf7_encode - Converts ISO-8859-1 string to modified UTF-7 text
imap_utf8 - Converts MIME-encoded text to UTF-8

LX. Informix

ifx_affected_rows - Get number of rows affected by a query
ifx_blobinfile_mode - Set the default blob mode for all select queries
ifx_byteasvarchar - Set the default byte mode
ifx_close - Close Informix connection
ifx_connect - Open Informix server connection
ifx_copy_blob - Duplicates the given blob object
ifx_create_blob - Creates an blob object
ifx_create_char - Creates an char object
ifx_do - Execute a previously prepared SQL-statement
ifx_error - Returns error code of last Informix call
ifx_errormsg - Returns error message of last Informix call
ifx_fetch_row - Get row as enumerated array
ifx_fieldproperties - List of SQL fieldproperties
ifx_fieldtypes - List of Informix SQL fields
ifx_free_blob - Deletes the blob object
ifx_free_char - Deletes the char object
ifx_free_result - Releases resources for the query
ifx_get_blob - Return the content of a blob object
ifx_get_char - Return the content of the char object
ifx_getsqlca - Get the contents of sqlca.sqlerrd[0..5] after a query
ifx_htmltbl_result - Formats all rows of a query into a HTML table
ifx_nullformat - Sets the default return value on a fetch row
ifx_num_fields - Returns the number of columns in the query
ifx_num_rows - Count the rows already fetched from a query
ifx_pconnect - Open persistent Informix connection
ifx_prepare - Prepare an SQL-statement for execution
ifx_query - Send Informix query
ifx_textasvarchar - Set the default text mode
ifx_update_blob - Updates the content of the blob object
ifx_update_char - Updates the content of the char object
ifxus_close_slob - Deletes the slob object
ifxus_create_slob - Creates an slob object and opens it
ifxus_free_slob - Deletes the slob object
ifxus_open_slob - Opens an slob object
ifxus_read_slob - Reads nbytes of the slob object
ifxus_seek_slob - Sets the current file or seek position
ifxus_tell_slob - Returns the current file or seek position
ifxus_write_slob - Writes a string into the slob object

LXI. Informix (PDO)

PDO_INFORMIX DSN - Connecting to Informix databases

LXII. Ingres II

ingres_autocommit - Switch autocommit on or off
ingres_close - Close an Ingres II database connection
ingres_commit - Commit a transaction
ingres_connect - Open a connection to an Ingres II database
ingres_cursor - Gets a cursor name for a given link resource
ingres_errno - Gets the last ingres error number generated
ingres_error - Gets a meaningful error message for the last error generated
ingres_errsqlstate - Gets the last SQLSTATE error code generated
ingres_fetch_array - Fetch a row of result into an array
ingres_fetch_object - Fetch a row of result into an object
ingres_fetch_row - Fetch a row of result into an enumerated array
ingres_field_length - Get the length of a field
ingres_field_name - Get the name of a field in a query result
ingres_field_nullable - Test if a field is nullable
ingres_field_precision - Get the precision of a field
ingres_field_scale - Get the scale of a field
ingres_field_type - Get the type of a field in a query result
ingres_num_fields - Get the number of fields returned by the last query
ingres_num_rows - Get the number of rows affected or returned by the last query
ingres_pconnect - Open a persistent connection to an Ingres II database
ingres_query - Send a SQL query to Ingres II
ingres_rollback - Roll back a transaction

LXIII. IRC Gateway

ircg_channel_mode - Set channel mode flags for user
ircg_disconnect - Close connection to server
ircg_eval_ecmascript_params - Decodes a list of JS-encoded parameters
ircg_fetch_error_msg - Returns the error from previous IRCG operation
ircg_get_username - Get username for connection
ircg_html_encode - Encodes HTML preserving output
ircg_ignore_add - Add a user to your ignore list on a server
ircg_ignore_del - Remove a user from your ignore list on a server
ircg_invite - Invites nickname to channel
ircg_is_conn_alive - Check connection status
ircg_join - Join a channel on a connected server
ircg_kick - Kick a user out of a channel on server
ircg_list - List topic/user count of channel(s)
ircg_lookup_format_messages - Check for the existence of a format message set
ircg_lusers - IRC network statistics
ircg_msg - Send message to channel or user on server
ircg_names - Query visible usernames
ircg_nick - Change nickname on server
ircg_nickname_escape - Encode special characters in nickname to be IRC-compliant
ircg_nickname_unescape - Decodes encoded nickname
ircg_notice - Send a notice to a user on server
ircg_oper - Elevates privileges to IRC OPER
ircg_part - Leave a channel on server
ircg_pconnect - Connect to an IRC server
ircg_register_format_messages - Register a format message set
ircg_set_current - Set current connection for output
ircg_set_file - Set logfile for connection
ircg_set_on_die - Set action to be executed when connection dies
ircg_topic - Set topic for channel on server
ircg_who - Queries server for WHO information
ircg_whois - Query server for user information

LXIV. Java

java_last_exception_clear - Clear last Java exception
java_last_exception_get - Get last Java exception

LXV. kadm5

kadm5_chpass_principal - Changes the principal's password
kadm5_create_principal - Creates a kerberos principal with the given parameters
kadm5_delete_principal - Deletes a kerberos principal
kadm5_destroy - Closes the connection to the admin server and releases all related resources
kadm5_flush - Flush all changes to the Kerberos database, leaving the connection to the Kerberos admin server open
kadm5_get_policies - Gets all policies from the Kerberos database
kadm5_get_principal - Gets the principal's entries from the Kerberos database
kadm5_get_principals - Gets all principals from the Kerberos database
kadm5_init_with_password - Opens a connection to the KADM5 library and initializes any neccessary state information
kadm5_modify_principal - Modifies a kerberos principal with the given parameters

LXVI. LDAP

ldap_8859_to_t61 - Translate 8859 characters to t61 characters
ldap_add - Add entries to LDAP directory
ldap_bind - Bind to LDAP directory
ldap_close - 別名 ldap_unbind
ldap_compare - Compare value of attribute found in entry specified with DN
ldap_connect - Connect to an LDAP server
ldap_count_entries - Count the number of entries in a search
ldap_delete - Delete an entry from a directory
ldap_dn2ufn - Convert DN to User Friendly Naming format
ldap_err2str - Convert LDAP error number into string error message
ldap_errno - Return the LDAP error number of the last LDAP command
ldap_error - Return the LDAP error message of the last LDAP command
ldap_explode_dn - Splits DN into its component parts
ldap_first_attribute - Return first attribute
ldap_first_entry - Return first result id
ldap_first_reference - Return first reference
ldap_free_result - Free result memory
ldap_get_attributes - Get attributes from a search result entry
ldap_get_dn - Get the DN of a result entry
ldap_get_entries - Get all result entries
ldap_get_option - Get the current value for given option
ldap_get_values_len - Get all binary values from a result entry
ldap_get_values - Get all values from a result entry
ldap_list - Single-level search
ldap_mod_add - Add attribute values to current attributes
ldap_mod_del - Delete attribute values from current attributes
ldap_mod_replace - Replace attribute values with new ones
ldap_modify - Modify an LDAP entry
ldap_next_attribute - Get the next attribute in result
ldap_next_entry - Get next result entry
ldap_next_reference - Get next reference
ldap_parse_reference - Extract information from reference entry
ldap_parse_result - Extract information from result
ldap_read - Read an entry
ldap_rename - Modify the name of an entry
ldap_sasl_bind - Bind to LDAP directory using SASL
ldap_search - Search LDAP tree
ldap_set_option - Set the value of the given option
ldap_set_rebind_proc - Set a callback function to do re-binds on referral chasing
ldap_sort - Sort LDAP result entries
ldap_start_tls - Start TLS
ldap_t61_to_8859 - Translate t61 characters to 8859 characters
ldap_unbind - Unbind from LDAP directory

LXVII. libxml

libxml_clear_errors - Clear libxml error buffer
libxml_get_errors - Retrieve array of errors
libxml_get_last_error - Retrieve last error from libxml
libxml_set_streams_context - Set the streams context for the next libxml document load or write
libxml_use_internal_errors - Disable libxml errors and allow user to fetch error information as needed

LXVIII. Lotus Notes

notes_body - Open the message msg_number in the specified mailbox on the specified server (leave serv
notes_copy_db - Copy a Lotus Notes database
notes_create_db - Create a Lotus Notes database
notes_create_note - Create a note using form form_name
notes_drop_db - Drop a Lotus Notes database
notes_find_note - Returns a note id found in database_name
notes_header_info - Open the message msg_number in the specified mailbox on the specified server (leave serv
notes_list_msgs - Returns the notes from a selected database_name
notes_mark_read - Mark a note_id as read for the User user_name
notes_mark_unread - Mark a note_id as unread for the User user_name
notes_nav_create - Create a navigator name, in database_name
notes_search - Find notes that match keywords in database_name
notes_unread - Returns the unread note id's for the current User user_name
notes_version - Get the version Lotus Notes

LXIX. LZF

lzf_compress - LZF compression
lzf_decompress - LZF decompression
lzf_optimized_for - Determines what LZF extension was optimized for

LXX. Mail

ezmlm_hash - Calculate the hash value needed by EZMLM
mail - Send mail

LXXI. mailparse

mailparse_determine_best_xfer_encoding - Figures out the best way of encoding the content read from the file pointer fp, which must be seek-able
mailparse_msg_create - Returns a handle that can be used to parse a message
mailparse_msg_extract_part_file - Extracts/decodes a message section, decoding the transfer encoding
mailparse_msg_extract_part - Extracts/decodes a message section
mailparse_msg_free - Frees a handle allocated by mailparse_msg_create
mailparse_msg_get_part_data - Returns an associative array of info about the message
mailparse_msg_get_part - Returns a handle on a given section in a mimemessage
mailparse_msg_get_structure - Returns an array of mime section names in the supplied message
mailparse_msg_parse_file - Parse file and return a resource representing the structure
mailparse_msg_parse - Incrementally parse data into buffer
mailparse_rfc822_parse_addresses - Parse addresses and returns a hash containing that data
mailparse_stream_encode - Streams data from source file pointer, apply encoding and write to destfp
mailparse_uudecode_all - Scans the data from fp and extract each embedded uuencoded file

LXXII. Math

abs - 絕對值
acos - 反餘弦
acosh - 反雙曲餘弦
asin - 反正弦
asinh - 反雙曲正弦
atan2 - 兩個參數的反正切
atan - 反正切
atanh - 反雙曲正切
base_convert - 在任意進制之間轉換數字
bindec - 二進制轉換為十進制
ceil - 進一法取整
cos - 餘弦
cosh - 雙曲餘弦
decbin - 十進制轉換為二進制
dechex - 十進制轉換為十六進制
decoct - 十進制轉換為八進制
deg2rad - 將角度轉換為弧度
exp - 計算 e（自然對數的底）的指數
expm1 - 返回 exp(number) - 1，甚至當 number 的值接近零也能計算出準確結果
floor - 捨去法取整
fmod - 返回除法的浮點數餘數
getrandmax - 顯示隨機數最大的可能值
hexdec - 十六進制轉換為十進制
hypot - 計算一直角三角形的斜邊長度
is_finite - 判斷是否為有限值
is_infinite - 判斷是否為無限值
is_nan - 判斷是否為合法數值
lcg_value - 組合線性同餘發生器
log10 - 以 10 為底的對數
log1p - 返回 log(1 + number)，甚至當 number 的值接近零也能計算出準確結果
log - 自然對數
max - 找出最大值
min - 找出最小值
mt_getrandmax - 顯示隨機數的最大可能值
mt_rand - 建立更好的隨機數
mt_srand - 播下一個更好的隨機數發生器種子
octdec - 八進制轉換為十進制
pi - 得到圓周率值
pow - 指數表達式
rad2deg - 將弧度數轉換為相應的角度數
rand - 產生一個隨機整數
round - 對浮點數進行四捨五入
sin - 正弦
sinh - 雙曲正弦
sqrt - 平方根
srand - 播下隨機數發生器種子
tan - 正切
tanh - 雙曲正切

LXXIII. MaxDB

maxdb_affected_rows - Gets the number of affected rows in a previous MaxDB operation
maxdb_autocommit - Turns on or off auto-commiting database modifications
maxdb_bind_param - 別名 maxdb_stmt_bind_param
maxdb_bind_result - 別名 maxdb_stmt_bind_result
maxdb_change_user - Changes the user of the specified database connection
maxdb_character_set_name - Returns the default character set for the database connection
maxdb_client_encoding - 別名 maxdb_character_set_name
maxdb_close_long_data - 別名 maxdb_stmt_close_long_data
maxdb_close - Closes a previously opened database connection
maxdb_commit - Commits the current transaction
maxdb_connect_errno - Returns the error code from last connect call
maxdb_connect_error - Returns a string description of the last connect error
maxdb_connect - Open a new connection to the MaxDB server
maxdb_data_seek - Adjusts the result pointer to an arbitary row in the result
maxdb_debug - Performs debugging operations
maxdb_disable_reads_from_master - Disable reads from master
maxdb_disable_rpl_parse - Disable RPL parse
maxdb_dump_debug_info - Dump debugging information into the log
maxdb_embedded_connect - Open a connection to an embedded MaxDB server
maxdb_enable_reads_from_master - Enable reads from master
maxdb_enable_rpl_parse - Enable RPL parse
maxdb_errno - Returns the error code for the most recent function call
maxdb_error - Returns a string description of the last error
maxdb_escape_string - 別名 maxdb_real_escape_string
maxdb_execute - 別名 maxdb_stmt_execute
maxdb_fetch_array - Fetch a result row as an associative, a numeric array, or both
maxdb_fetch_assoc - Fetch a result row as an associative array
maxdb_fetch_field_direct - Fetch meta-data for a single field
maxdb_fetch_field - Returns the next field in the result set
maxdb_fetch_fields - Returns an array of resources representing the fields in a result set
maxdb_fetch_lengths - Returns the lengths of the columns of the current row in the result set
maxdb_fetch_object - Returns the current row of a result set as an object
maxdb_fetch_row - Get a result row as an enumerated array
maxdb_fetch - 別名 maxdb_stmt_fetch
maxdb_field_count - Returns the number of columns for the most recent query
maxdb_field_seek - Set result pointer to a specified field offset
maxdb_field_tell - Get current field offset of a result pointer
maxdb_free_result - Frees the memory associated with a result
maxdb_get_client_info - Returns the MaxDB client version as a string
maxdb_get_client_version - Get MaxDB client info
maxdb_get_host_info - Returns a string representing the type of connection used
maxdb_get_metadata - 別名 maxdb_stmt_result_metadata
maxdb_get_proto_info - Returns the version of the MaxDB protocol used
maxdb_get_server_info - Returns the version of the MaxDB server
maxdb_get_server_version - Returns the version of the MaxDB server as an integer
maxdb_info - Retrieves information about the most recently executed query
maxdb_init - Initializes MaxDB and returns an resource for use with maxdb_real_connect
maxdb_insert_id - Returns the auto generated id used in the last query
maxdb_kill - Disconnects from a MaxDB server
maxdb_master_query - Enforce execution of a query on the master in a master/slave setup
maxdb_more_results - Check if there any more query results from a multi query
maxdb_multi_query - Performs a query on the database
maxdb_next_result - Prepare next result from multi_query
maxdb_num_fields - Get the number of fields in a result
maxdb_num_rows - Gets the number of rows in a result
maxdb_options - Set options
maxdb_param_count - 別名 maxdb_stmt_param_count
maxdb_ping - Pings a server connection, or tries to reconnect if the connection has gone down
maxdb_prepare - Prepare a SQL statement for execution
maxdb_query - Performs a query on the database
maxdb_real_connect - Opens a connection to a MaxDB server
maxdb_real_escape_string - Escapes special characters in a string for use in a SQL statement, taking into account the current charset of the connection
maxdb_real_query - Execute an SQL query
maxdb_report - Enables or disables internal report functions
maxdb_rollback - Rolls back current transaction
maxdb_rpl_parse_enabled - Check if RPL parse is enabled
maxdb_rpl_probe - RPL probe
maxdb_rpl_query_type - Returns RPL query type
maxdb_select_db - Selects the default database for database queries
maxdb_send_long_data - 別名 maxdb_stmt_send_long_data
maxdb_send_query - Send the query and return
maxdb_server_end - Shut down the embedded server
maxdb_server_init - Initialize embedded server
maxdb_set_opt - 別名 maxdb_options
maxdb_sqlstate - Returns the SQLSTATE error from previous MaxDB operation
maxdb_ssl_set - Used for establishing secure connections using SSL
maxdb_stat - Gets the current system status
maxdb_stmt_affected_rows - Returns the total number of rows changed, deleted, or inserted by the last executed statement
maxdb_stmt_bind_param - Binds variables to a prepared statement as parameters
maxdb_stmt_bind_result - Binds variables to a prepared statement for result storage
maxdb_stmt_close_long_data - Ends a sequence of maxdb_stmt_send_long_data
maxdb_stmt_close - Closes a prepared statement
maxdb_stmt_data_seek - Seeks to an arbitray row in statement result set
maxdb_stmt_errno - Returns the error code for the most recent statement call
maxdb_stmt_error - Returns a string description for last statement error
maxdb_stmt_execute - Executes a prepared Query
maxdb_stmt_fetch - Fetch results from a prepared statement into the bound variables
maxdb_stmt_free_result - Frees stored result memory for the given statement handle
maxdb_stmt_init - Initializes a statement and returns an resource for use with maxdb_stmt_prepare
maxdb_stmt_num_rows - Return the number of rows in statements result set
maxdb_stmt_param_count - Returns the number of parameter for the given statement
maxdb_stmt_prepare - Prepare a SQL statement for execution
maxdb_stmt_reset - Resets a prepared statement
maxdb_stmt_result_metadata - Returns result set metadata from a prepared statement
maxdb_stmt_send_long_data - Send data in blocks
maxdb_stmt_sqlstate - Returns SQLSTATE error from previous statement operation
maxdb_stmt_store_result - Transfers a result set from a prepared statement
maxdb_store_result - Transfers a result set from the last query
maxdb_thread_id - Returns the thread ID for the current connection
maxdb_thread_safe - Returns whether thread safety is given or not
maxdb_use_result - Initiate a result set retrieval
maxdb_warning_count - Returns the number of warnings from the last query for the given link

LXXIV. MCAL

mcal_append_event - Store a new event into an MCAL calendar
mcal_close - Close an MCAL stream
mcal_create_calendar - Create a new MCAL calendar
mcal_date_compare - Compares two dates
mcal_date_valid - Returns TRUE if the given year, month, day is a valid date
mcal_day_of_week - Returns the day of the week of the given date
mcal_day_of_year - Returns the day of the year of the given date
mcal_days_in_month - Returns the number of days in a month
mcal_delete_calendar - Delete an MCAL calendar
mcal_delete_event - Delete an event from an MCAL calendar
mcal_event_add_attribute - Adds an attribute and a value to the streams global event structure
mcal_event_init - Initializes a streams global event structure
mcal_event_set_alarm - Sets the alarm of the streams global event structure
mcal_event_set_category - Sets the category of the streams global event structure
mcal_event_set_class - Sets the class of the streams global event structure
mcal_event_set_description - Sets the description of the streams global event structure
mcal_event_set_end - Sets the end date and time of the streams global event structure
mcal_event_set_recur_daily - Sets the recurrence of the streams global event structure
mcal_event_set_recur_monthly_mday - Sets the recurrence of the streams global event structure
mcal_event_set_recur_monthly_wday - Sets the recurrence of the streams global event structure
mcal_event_set_recur_none - Sets the recurrence of the streams global event structure
mcal_event_set_recur_weekly - Sets the recurrence of the streams global event structure
mcal_event_set_recur_yearly - Sets the recurrence of the streams global event structure
mcal_event_set_start - Sets the start date and time of the streams global event structure
mcal_event_set_title - Sets the title of the streams global event structure
mcal_expunge - Deletes all events marked for being expunged
mcal_fetch_current_stream_event - Returns an object containing the current streams event structure
mcal_fetch_event - Fetches an event from the calendar stream
mcal_is_leap_year - Returns if the given year is a leap year or not
mcal_list_alarms - Return a list of events that has an alarm triggered at the given datetime
mcal_list_events - Return a list of IDs for a date or a range of dates
mcal_next_recurrence - Returns the next recurrence of the event
mcal_open - Opens up an MCAL connection
mcal_popen - Opens up a persistent MCAL connection
mcal_rename_calendar - Rename an MCAL calendar
mcal_reopen - Reopens an MCAL connection
mcal_snooze - Turn off an alarm for an event
mcal_store_event - Modify an existing event in an MCAL calendar
mcal_time_valid - Returns TRUE if the given hour, minutes and seconds is a valid time
mcal_week_of_year - Returns the week number of the given date

LXXV. mcrypt

mcrypt_cbc - Encrypt/decrypt data in CBC mode
mcrypt_cfb - Encrypt/decrypt data in CFB mode
mcrypt_create_iv - Create an initialization vector (IV) from a random source
mcrypt_decrypt - Decrypts crypttext with given parameters
mcrypt_ecb - Deprecated: Encrypt/decrypt data in ECB mode
mcrypt_enc_get_algorithms_name - Returns the name of the opened algorithm
mcrypt_enc_get_block_size - Returns the blocksize of the opened algorithm
mcrypt_enc_get_iv_size - Returns the size of the IV of the opened algorithm
mcrypt_enc_get_key_size - Returns the maximum supported keysize of the opened mode
mcrypt_enc_get_modes_name - Returns the name of the opened mode
mcrypt_enc_get_supported_key_sizes - Returns an array with the supported keysizes of the opened algorithm
mcrypt_enc_is_block_algorithm_mode - Checks whether the encryption of the opened mode works on blocks
mcrypt_enc_is_block_algorithm - Checks whether the algorithm of the opened mode is a block algorithm
mcrypt_enc_is_block_mode - Checks whether the opened mode outputs blocks
mcrypt_enc_self_test - This function runs a self test on the opened module
mcrypt_encrypt - Encrypts plaintext with given parameters
mcrypt_generic_deinit - This function deinitializes an encryption module
mcrypt_generic_end - This function terminates encryption
mcrypt_generic_init - This function initializes all buffers needed for encryption
mcrypt_generic - This function encrypts data
mcrypt_get_block_size - Get the block size of the specified cipher
mcrypt_get_cipher_name - Get the name of the specified cipher
mcrypt_get_iv_size - Returns the size of the IV belonging to a specific cipher/mode combination
mcrypt_get_key_size - Get the key size of the specified cipher
mcrypt_list_algorithms - Get an array of all supported ciphers
mcrypt_list_modes - Get an array of all supported modes
mcrypt_module_close - Close the mcrypt module
mcrypt_module_get_algo_block_size - Returns the blocksize of the specified algorithm
mcrypt_module_get_algo_key_size - Returns the maximum supported keysize of the opened mode
mcrypt_module_get_supported_key_sizes - Returns an array with the supported keysizes of the opened algorithm
mcrypt_module_is_block_algorithm_mode - Returns if the specified module is a block algorithm or not
mcrypt_module_is_block_algorithm - This function checks whether the specified algorithm is a block algorithm
mcrypt_module_is_block_mode - Returns if the specified mode outputs blocks or not
mcrypt_module_open - Opens the module of the algorithm and the mode to be used
mcrypt_module_self_test - This function runs a self test on the specified module
mcrypt_ofb - Encrypt/decrypt data in OFB mode
mdecrypt_generic - Decrypt data

LXXVI. MCVE

m_checkstatus - Check to see if a transaction has completed
m_completeauthorizations - Number of complete authorizations in queue, returning an array of their identifiers
m_connect - Establish the connection to MCVE
m_connectionerror - Get a textual representation of why a connection failed
m_deletetrans - Delete specified transaction from MCVE_CONN structure
m_destroyconn - Destroy the connection and MCVE_CONN structure
m_destroyengine - Free memory associated with IP/SSL connectivity
m_getcell - Get a specific cell from a comma delimited response by column name
m_getcellbynum - Get a specific cell from a comma delimited response by column number
m_getcommadelimited - Get the RAW comma delimited data returned from MCVE
m_getheader - Get the name of the column in a comma-delimited response
m_initconn - Create and initialize an MCVE_CONN structure
m_initengine - Ready the client for IP/SSL Communication
m_iscommadelimited - Checks to see if response is comma delimited
m_maxconntimeout - The maximum amount of time the API will attempt a connection to MCVE
m_monitor - Perform communication with MCVE (send/receive data) Non-blocking
m_numcolumns - Number of columns returned in a comma delimited response
m_numrows - Number of rows returned in a comma delimited response
m_parsecommadelimited - Parse the comma delimited response so m_getcell, etc will work
m_responsekeys - Returns array of strings which represents the keys that can be used for response parameters on this transaction
m_responseparam - Get a custom response parameter
m_returnstatus - Check to see if the transaction was successful
m_setblocking - Set blocking/non-blocking mode for connection
m_setdropfile - Set the connection method to Drop-File
m_setip - Set the connection method to IP
m_setssl_cafile - Set SSL CA (Certificate Authority) file for verification of server certificate
m_setssl_files - Set certificate key files and certificates if server requires client certificate verification
m_setssl - Set the connection method to SSL
m_settimeout - Set maximum transaction time (per trans)
m_sslcert_gen_hash - Generate hash for SSL client certificate verification
m_transactionssent - Check to see if outgoing buffer is clear
m_transinqueue - Number of transactions in client-queue
m_transkeyval - Add key/value pair to a transaction. Replaces deprecated transparam()
m_transnew - Start a new transaction
m_transsend - Finalize and send the transaction
m_uwait - Wait x microsecs
m_validateidentifier - Whether or not to validate the passed identifier on any transaction it is passed to
m_verifyconnection - Set whether or not to PING upon connect to verify connection
m_verifysslcert - Set whether or not to verify the server ssl certificate

LXXVII. Memcache

Memcache::add - Add an item to the server
Memcache::addServer - Add a memcached server to connection pool
Memcache::close - Close memcached server connection
Memcache::connect - Open memcached server connection
memcache_debug - Turn debug output on/off
Memcache::decrement - Decrement item's value
Memcache::delete - Delete item from the server
Memcache::flush - Flush all existing items at the server
Memcache::get - Retrieve item from the server
Memcache::getExtendedStats - Get statistics from all servers in pool
Memcache::getStats - Get statistics of the server
Memcache::getVersion - Return version of the server
Memcache::increment - Increment item's value
Memcache::pconnect - Open memcached server persistent connection
Memcache::replace - Replace value of the existing item
Memcache::set - Store data at the server
Memcache::setCompressThreshold - Enable automatic compression of large values

LXXVIII. mhash

mhash_count - Get the highest available hash id
mhash_get_block_size - Get the block size of the specified hash
mhash_get_hash_name - Get the name of the specified hash
mhash_keygen_s2k - Generates a key
mhash - Compute hash

LXXIX. Mimetype

mime_content_type - Detect MIME Content-type for a file

LXXX. Ming (flash)

SWFButton::addASound - Associates a sound with a button transition
SWFButton::setMenu - enable track as menu button behaviour
SWFDisplayItem::addAction - Adds this SWFAction to the given SWFSprite instance
SWFDisplayItem::endMask - Another way of defining a MASK layer
SWFDisplayItem::getRot -
SWFDisplayItem::getX -
SWFDisplayItem::getXScale -
SWFDisplayItem::getXSkew -
SWFDisplayItem::getY -
SWFDisplayItem::getYScale -
SWFDisplayItem::getYSkew -
SWFDisplayItem::setMaskLevel - Defines a MASK layer at level
SWFDisplayItem::setMatrix - Sets the item's transform matrix
SWFFont::getAscent - Returns the ascent of the font, or 0 if not available
SWFFont::getDescent - Returns the descent of the font, or 0 if not available
SWFFont::getLeading - Returns the leading of the font, or 0 if not available
SWFFont::getShape - Returns the glyph shape of a char as a text string
SWFFont::getUTF8Width - Calculates the width of the given string in this font at full height
SWFFontChar::addChars - Adds characters to a font for exporting font
SWFFontChar::addUTF8Chars - Adds characters to a font for exporting font
SWFMovie::addExport -
SWFMovie::addFont -
SWFMovie::importChar -
SWFMovie::importFont -
SWFMovie::labelFrame - Labels frame
SWFMovie::saveToFile -
SWFMovie::startSound -
SWFMovie::stopSound -
SWFMovie::writeExports -
SWFPrebuiltClip - Returns a SWFPrebuiltClip object
SWFShape::drawArc - Draws an arc of radius r centered at the current location, from angle startAngle to angle endAngle measured clockwise from 12 o'clock
SWFShape::drawCircle - Draws a circle of radius r centered at the current location, in a counter-clockwise fashion
SWFShape::drawCubic - Draws a cubic bezier curve using the current position and the three given points as control points
SWFShape::drawCubicTo - Draws a cubic bezier curve using the current position and the three given points as control points
SWFShape::drawGlyph - Draws the first character in the given string into the shape using the glyph definition from the given font
SWFSound - Returns a new SWFSound object from given file
SWFSoundInstance::loopCount -
SWFSoundInstance::loopInPoint -
SWFSoundInstance::loopOutPoint -
SWFSoundInstance::noMultiple -
SWFSprite::labelFrame - Labels frame
SWFSprite::startSound -
SWFSprite::stopSound -
SWFText::addUTF8String - Writes the given text into this SWFText object at the current pen position, using the current font, height, spacing, and color
SWFText::getAscent - Returns the ascent of the current font at its current size, or 0 if not available
SWFText::getDescent - Returns the descent of the current font at its current size, or 0 if not available
SWFText::getLeading - Returns the leading of the current font at its current size, or 0 if not available
SWFText::getUTF8Width - calculates the width of the given string in this text objects current font and size
SWFTextField::addChars - adds characters to a font that will be available within a textfield
SWFTextField::setPadding - Sets the padding of this textfield
SWFVideoStream::getNumFrames -
SWFVideoStream::setDimension -
SWFVideoStream - Returns a SWFVideoStream object
ming_keypress - Returns the action flag for keyPress(char)
ming_setcubicthreshold - Set cubic threshold (?)
ming_setscale - Set scale (?)
ming_useConstants - Use constant pool (?)
ming_useswfversion - Use SWF version (?)
SWFAction - Creates a new Action
SWFBitmap->getHeight - Returns the bitmap's height
SWFBitmap->getWidth - Returns the bitmap's width
SWFBitmap - Loads Bitmap object
SWFbutton->addAction - Adds an action
SWFbutton->addShape - Adds a shape to a button
SWFbutton->setAction - Sets the action
SWFbutton->setdown - Alias for addShape(shape, SWFBUTTON_DOWN)
SWFbutton->setHit - Alias for addShape(shape, SWFBUTTON_HIT)
SWFbutton->setOver - Alias for addShape(shape, SWFBUTTON_OVER)
SWFbutton->setUp - Alias for addShape(shape, SWFBUTTON_UP)
SWFbutton - Creates a new Button
SWFDisplayItem->addColor - Adds the given color to this item's color transform
SWFDisplayItem->move - Moves object in relative coordinates
SWFDisplayItem->moveTo - Moves object in global coordinates
SWFDisplayItem->multColor - Multiplies the item's color transform
SWFDisplayItem->remove - Removes the object from the movie
SWFDisplayItem->Rotate - Rotates in relative coordinates
SWFDisplayItem->rotateTo - Rotates the object in global coordinates
SWFDisplayItem->scale - Scales the object in relative coordinates
SWFDisplayItem->scaleTo - Scales the object in global coordinates
SWFDisplayItem->setDepth - Sets z-order
SWFDisplayItem->setName - Sets the object's name
SWFDisplayItem->setRatio - Sets the object's ratio
SWFDisplayItem->skewX - Sets the X-skew
SWFDisplayItem->skewXTo - Sets the X-skew
SWFDisplayItem->skewY - Sets the Y-skew
SWFDisplayItem->skewYTo - Sets the Y-skew
SWFFill->moveTo - Moves fill origin
SWFFill->rotateTo - Sets fill's rotation
SWFFill->scaleTo - Sets fill's scale
SWFFill->skewXTo - Sets fill x-skew
SWFFill->skewYTo - Sets fill y-skew
SWFFill - Loads SWFFill object
swffont->getwidth - Returns the string's width
SWFFont - Loads a font definition
SWFGradient->addEntry - Adds an entry to the gradient list
SWFGradient - Creates a gradient object
SWFMorph->getshape1 - Gets a handle to the starting shape
SWFMorph->getshape2 - Gets a handle to the ending shape
SWFMorph - Creates a new SWFMorph object
SWFMovie->add - Adds any type of data to a movie
SWFMovie->nextframe - Moves to the next frame of the animation
SWFMovie->output - Dumps your lovingly prepared movie out
swfmovie->remove - Removes the object instance from the display list
SWFMovie->save - Saves your movie in a file
SWFMovie->setbackground - Sets the background color
SWFMovie->setdimension - Sets the movie's width and height
SWFMovie->setframes - Sets the total number of frames in the animation
SWFMovie->setrate - Sets the animation's frame rate
SWFMovie->streammp3 - Streams a MP3 file
SWFMovie - Creates a new movie object, representing an SWF version 4 movie
SWFShape->addFill - Adds a solid fill to the shape
SWFShape->drawCurve - Draws a curve (relative)
SWFShape->drawCurveTo - Draws a curve
SWFShape->drawLine - Draws a line (relative)
SWFShape->drawLineTo - Draws a line
SWFShape->movePen - Moves the shape's pen (relative)
SWFShape->movePenTo - Moves the shape's pen
SWFShape->setLeftFill - Sets left rasterizing color
SWFShape->setLine - Sets the shape's line style
SWFShape->setRightFill - Sets right rasterizing color
SWFShape - Creates a new shape object
swfsprite->add - Adds an object to a sprite
SWFSprite->nextframe - Moves to the next frame of the animation
SWFSprite->remove - Removes an object to a sprite
SWFSprite->setframes - Sets the total number of frames in the animation
SWFSprite - Creates a movie clip (a sprite)
SWFText->addString - Draws a string
SWFText->getWidth - Computes string's width
SWFText->moveTo - Moves the pen
SWFText->setColor - Sets the current font color
SWFText->setFont - Sets the current font
SWFText->setHeight - Sets the current font height
SWFText->setSpacing - Sets the current font spacing
SWFText - Creates a new SWFText object
SWFTextField->addstring - Concatenates the given string to the text field
SWFTextField->align - Sets the text field alignment
SWFTextField->setbounds - Sets the text field width and height
SWFTextField->setcolor - Sets the color of the text field
SWFTextField->setFont - Sets the text field font
SWFTextField->setHeight - Sets the font height of this text field font
SWFTextField->setindentation - Sets the indentation of the first line
SWFTextField->setLeftMargin - Sets the left margin width of the text field
SWFTextField->setLineSpacing - Sets the line spacing of the text field
SWFTextField->setMargins - Sets the margins width of the text field
SWFTextField->setname - Sets the variable name
SWFTextField->setrightMargin - Sets the right margin width of the text field
SWFTextField - Creates a text field object

LXXXI. Misc.

connection_aborted - Returns TRUE if client disconnected
connection_status - Returns connection status bitfield
connection_timeout - Return TRUE if script timed out
constant - Returns the value of a constant
define - Defines a named constant
defined - Checks whether a given named constant exists
die - Equivalent to exit
eval - Evaluate a string as PHP code
exit - Output a message and terminate the current script
get_browser - Tells what the user's browser is capable of
__halt_compiler - Halts the compiler execution
highlight_file - Syntax highlighting of a file
highlight_string - Syntax highlighting of a string
ignore_user_abort - Set whether a client disconnect should abort script execution
pack - Pack data into binary string
php_check_syntax - Check the PHP syntax of (and execute) the specified file
php_strip_whitespace - Return source with stripped comments and whitespace
show_source - 別名 highlight_file
sleep - Delay execution
time_nanosleep - Delay for a number of seconds and nanoseconds
time_sleep_until - Make the script sleep until the specified time
uniqid - Generate a unique ID
unpack - Unpack data from binary string
usleep - Delay execution in microseconds

LXXXII. mnoGoSearch

udm_add_search_limit - Add various search limits
udm_alloc_agent_array - Allocate mnoGoSearch session
udm_alloc_agent - Allocate mnoGoSearch session
udm_api_version - Get mnoGoSearch API version
udm_cat_list - Get all the categories on the same level with the current one
udm_cat_path - Get the path to the current category
udm_check_charset - Check if the given charset is known to mnogosearch
udm_check_stored - Check connection to stored
udm_clear_search_limits - Clear all mnoGoSearch search restrictions
udm_close_stored - Close connection to stored
udm_crc32 - Return CRC32 checksum of given string
udm_errno - Get mnoGoSearch error number
udm_error - Get mnoGoSearch error message
udm_find - Perform search
udm_free_agent - Free mnoGoSearch session
udm_free_ispell_data - Free memory allocated for ispell data
udm_free_res - Free mnoGoSearch result
udm_get_doc_count - Get total number of documents in database
udm_get_res_field - Fetch mnoGoSearch result field
udm_get_res_param - Get mnoGoSearch result parameters
udm_hash32 - Return Hash32 checksum of gived string
udm_load_ispell_data - Load ispell data
udm_open_stored - Open connection to stored
udm_set_agent_param - Set mnoGoSearch agent session parameters

LXXXIII. MS SQL Server

mssql_bind - Adds a parameter to a stored procedure or a remote stored procedure
mssql_close - Close MS SQL Server connection
mssql_connect - Open MS SQL server connection
mssql_data_seek - Moves internal row pointer
mssql_execute - Executes a stored procedure on a MS SQL server database
mssql_fetch_array - Fetch a result row as an associative array, a numeric array, or both
mssql_fetch_assoc - Returns an associative array of the current row in the result set specified by result_id
mssql_fetch_batch - Returns the next batch of records
mssql_fetch_field - Get field information
mssql_fetch_object - Fetch row as object
mssql_fetch_row - Get row as enumerated array
mssql_field_length - Get the length of a field
mssql_field_name - Get the name of a field
mssql_field_seek - Seeks to the specified field offset
mssql_field_type - Gets the type of a field
mssql_free_result - Free result memory
mssql_free_statement - Free statement memory
mssql_get_last_message - Returns the last message from the server
mssql_guid_string - Converts a 16 byte binary GUID to a string
mssql_init - Initializes a stored procedure or a remote stored procedure
mssql_min_error_severity - Sets the lower error severity
mssql_min_message_severity - Sets the lower message severity
mssql_next_result - Move the internal result pointer to the next result
mssql_num_fields - Gets the number of fields in result
mssql_num_rows - Gets the number of rows in result
mssql_pconnect - Open persistent MS SQL connection
mssql_query - Send MS SQL query
mssql_result - Get result data
mssql_rows_affected - Returns the number of records affected by the query
mssql_select_db - Select MS SQL database

LXXXIV. MS SQL Server (PDO)

PDO_DBLIB DSN - Connecting to Microsoft SQL Server and Sybase databases

LXXXV. Msession

msession_connect - Connect to msession server
msession_count - Get session count
msession_create - Create a session
msession_destroy - Destroy a session
msession_disconnect - Close connection to msession server
msession_find - Find all sessions with name and value
msession_get_array - Get array of msession variables
msession_get_data - Get data session unstructured data
msession_get - Get value from session
msession_inc - Increment value in session
msession_list - List all sessions
msession_listvar - List sessions with variable
msession_lock - Lock a session
msession_plugin - Call an escape function within the msession personality plugin
msession_randstr - Get random string
msession_set_array - Set msession variables from an array
msession_set_data - Set data session unstructured data
msession_set - Set value in session
msession_timeout - Set/get session timeout
msession_uniq - Get unique id
msession_unlock - Unlock a session

LXXXVI. mSQL

msql_affected_rows - Returns number of affected rows
msql_close - Close mSQL connection
msql_connect - Open mSQL connection
msql_create_db - Create mSQL database
msql_createdb - 別名 msql_create_db
msql_data_seek - Move internal row pointer
msql_db_query - Send mSQL query
msql_dbname - 別名 msql_result
msql_drop_db - Drop (delete) mSQL database
msql_error - Returns error message of last msql call
msql_fetch_array - Fetch row as array
msql_fetch_field - Get field information
msql_fetch_object - Fetch row as object
msql_fetch_row - Get row as enumerated array
msql_field_flags - Get field flags
msql_field_len - Get field length
msql_field_name - Get the name of the specified field in a result
msql_field_seek - Set field offset
msql_field_table - Get table name for field
msql_field_type - Get field type
msql_fieldflags - Alias of msql_field_flags
msql_fieldlen - Alias of msql_field_len
msql_fieldname - Alias of msql_field_name
msql_fieldtable - Alias of msql_field_table
msql_fieldtype - Alias of msql_field_type
msql_free_result - Free result memory
msql_list_dbs - List mSQL databases on server
msql_list_fields - List result fields
msql_list_tables - List tables in an mSQL database
msql_num_fields - Get number of fields in result
msql_num_rows - Get number of rows in result
msql_numfields - Alias of msql_num_fields
msql_numrows - Alias of msql_num_rows
msql_pconnect - Open persistent mSQL connection
msql_query - Send mSQL query
msql_regcase - Alias of sql_regcase
msql_result - Get result data
msql_select_db - Select mSQL database
msql_tablename - Alias of msql_result
msql - Alias of msql_db_query

LXXXVII. Multibyte String

mb_convert_case - Perform case folding on a string
mb_convert_encoding - Convert character encoding
mb_convert_kana - Convert "kana" one from another ("zen-kaku", "han-kaku" and more)
mb_convert_variables - Convert character code in variable(s)
mb_decode_mimeheader - Decode string in MIME header field
mb_decode_numericentity - Decode HTML numeric string reference to character
mb_detect_encoding - Detect character encoding
mb_detect_order - Set/Get character encoding detection order
mb_encode_mimeheader - Encode string for MIME header
mb_encode_numericentity - Encode character to HTML numeric string reference
mb_ereg_match - Regular expression match for multibyte string
mb_ereg_replace - Replace regular expression with multibyte support
mb_ereg_search_getpos - Returns start point for next regular expression match
mb_ereg_search_getregs - Retrieve the result from the last multibyte regular expression match
mb_ereg_search_init - Setup string and regular expression for multibyte regular expression match
mb_ereg_search_pos - Return position and length of matched part of multibyte regular expression for predefined multibyte string
mb_ereg_search_regs - Returns the matched part of multibyte regular expression
mb_ereg_search_setpos - Set start point of next regular expression match
mb_ereg_search - Multibyte regular expression match for predefined multibyte string
mb_ereg - Regular expression match with multibyte support
mb_eregi_replace - Replace regular expression with multibyte support ignoring case
mb_eregi - Regular expression match ignoring case with multibyte support
mb_get_info - Get internal settings of mbstring
mb_http_input - Detect HTTP input character encoding
mb_http_output - Set/Get HTTP output character encoding
mb_internal_encoding - Set/Get internal character encoding
mb_language - Set/Get current language
mb_list_encodings - Returns an array of all supported encodings
mb_output_handler - Callback function converts character encoding in output buffer
mb_parse_str - Parse GET/POST/COOKIE data and set global variable
mb_preferred_mime_name - Get MIME charset string
mb_regex_encoding - Returns current encoding for multibyte regex as string
mb_regex_set_options - Set/Get the default options for mbregex functions
mb_send_mail - Send encoded mail
mb_split - Split multibyte string using regular expression
mb_strcut - Get part of string
mb_strimwidth - Get truncated string with specified width
mb_strlen - Get string length
mb_strpos - Find position of first occurrence of string in a string
mb_strrpos - Find position of last occurrence of a string in a string
mb_strtolower - Make a string lowercase
mb_strtoupper - Make a string uppercase
mb_strwidth - Return width of string
mb_substitute_character - Set/Get substitution character
mb_substr_count - Count the number of substring occurrences
mb_substr - Get part of string

LXXXVIII. muscat

muscat_close - Shuts down the muscat session and releases any memory back to PHP
muscat_get - Gets a line back from the core muscat API
muscat_give - Sends string to the core muscat API
muscat_setup_net - Creates a new muscat session and returns the handle
muscat_setup - Creates a new muscat session and returns the handle

LXXXIX. MySQL

mysql_affected_rows - 取得前一次 MySQL 操作所影響的記錄行數
mysql_change_user - 改變活動連接中登入的會員
mysql_client_encoding - 返回字符集的名稱
mysql_close - 關閉 MySQL 連接
mysql_connect - 打開一個到 MySQL 伺服器的連接
mysql_create_db - 新建一個 MySQL 資料庫
mysql_data_seek - 移動內部結果的指針
mysql_db_name - 取得結果資料
mysql_db_query - 發送一條 MySQL 查詢
mysql_drop_db - 丟棄（刪除）一個 MySQL 資料庫
mysql_errno - 返回上一個 MySQL 操作中的錯誤內容的數字編碼
mysql_error - 返回上一個 MySQL 操作產生的文字錯誤內容
mysql_escape_string - 轉義一個字符串用於 mysql_query
mysql_fetch_array - 從結果集中取得一行作為關聯陣列，或數字陣列，或二者兼有
mysql_fetch_assoc - 從結果集中取得一行作為關聯陣列
mysql_fetch_field - 從結果集中取得列內容並作為物件返回
mysql_fetch_lengths - 取得結果集中每個輸出的長度
mysql_fetch_object - 從結果集中取得一行作為物件
mysql_fetch_row - 從結果集中取得一行作為枚舉陣列
mysql_field_flags - 從結果中取得和指定字段關聯的標誌
mysql_field_len - 返回指定字段的長度
mysql_field_name - 取得結果中指定字段的字段名
mysql_field_seek - 將結果集中的指針設定為制定的字段偏移量
mysql_field_table - 取得指定字段所在的表名
mysql_field_type - 取得結果集中指定字段的類型
mysql_free_result - 釋放結果內存
mysql_get_client_info - 取得 MySQL 客戶端內容
mysql_get_host_info - 取得 MySQL 主機內容
mysql_get_proto_info - 取得 MySQL 協議內容
mysql_get_server_info - 取得 MySQL 伺服器內容
mysql_info - 取得最近一條查詢的內容
mysql_insert_id - 取得上一步 INSERT 操作產生的 ID
mysql_list_dbs - 列出 MySQL 伺服器中所有的資料庫
mysql_list_fields - 列出 MySQL 結果中的字段
mysql_list_processes - 列出 MySQL 進程
mysql_list_tables - 列出 MySQL 資料庫中的表
mysql_num_fields - 取得結果集中字段的數目
mysql_num_rows - 取得結果集中行的數目
mysql_pconnect - 打開一個到 MySQL 伺服器的持久連接
mysql_ping - Ping 一個伺服器連接，如果沒有連接則重新連接
mysql_query - 發送一條 MySQL 查詢
mysql_real_escape_string - 轉義 SQL 語句中使用的字符串中的特殊字符，並考慮到連接的目前字符集
mysql_result - 取得結果資料
mysql_select_db - 選擇 MySQL 資料庫
mysql_stat - 取得目前系統狀態
mysql_tablename - 取得表名
mysql_thread_id - 返回目前線程的 ID
mysql_unbuffered_query - 向 MySQL 發送一條 SQL 查詢，並不取得和暫存結果的行

XC. MySQL (PDO)

PDO_MYSQL DSN - Connecting to MySQL databases

XCI. mysqli

mysqli_affected_rows - Gets the number of affected rows in a previous MySQL operation
mysqli_autocommit - Turns on or off auto-commiting database modifications
mysqli_bind_param - Alias for mysqli_stmt_bind_param
mysqli_bind_result - Alias for mysqli_stmt_bind_result
mysqli_change_user - Changes the user of the specified database connection
mysqli_character_set_name - Returns the default character set for the database connection
mysqli_client_encoding - Alias of mysqli_character_set_name
mysqli_close - Closes a previously opened database connection
mysqli_commit - Commits the current transaction
mysqli_connect_errno - Returns the error code from last connect call
mysqli_connect_error - Returns a string description of the last connect error
mysqli_connect - Open a new connection to the MySQL server
mysqli_data_seek - Adjusts the result pointer to an arbitary row in the result
mysqli_debug - Performs debugging operations
mysqli_disable_reads_from_master - Disable reads from master
mysqli_disable_rpl_parse - Disable RPL parse
mysqli_dump_debug_info - Dump debugging information into the log
mysqli_embedded_connect - Open a connection to an embedded mysql server
mysqli_enable_reads_from_master - Enable reads from master
mysqli_enable_rpl_parse - Enable RPL parse
mysqli_errno - Returns the error code for the most recent function call
mysqli_error - Returns a string description of the last error
mysqli_escape_string - Alias of mysqli_real_escape_string
mysqli_execute - Alias for mysqli_stmt_execute
mysqli_fetch_array - Fetch a result row as an associative, a numeric array, or both
mysqli_fetch_assoc - Fetch a result row as an associative array
mysqli_fetch_field_direct - Fetch meta-data for a single field
mysqli_fetch_field - Returns the next field in the result set
mysqli_fetch_fields - Returns an array of objects representing the fields in a result set
mysqli_fetch_lengths - Returns the lengths of the columns of the current row in the result set
mysqli_fetch_object - Returns the current row of a result set as an object
mysqli_fetch_row - Get a result row as an enumerated array
mysqli_fetch - Alias for mysqli_stmt_fetch
mysqli_field_count - Returns the number of columns for the most recent query
mysqli_field_seek - Set result pointer to a specified field offset
mysqli_field_tell - Get current field offset of a result pointer
mysqli_free_result - Frees the memory associated with a result
mysqli_get_client_info - Returns the MySQL client version as a string
mysqli_get_client_version - Get MySQL client info
mysqli_get_host_info - Returns a string representing the type of connection used
mysqli_get_metadata - Alias for mysqli_stmt_result_metadata
mysqli_get_proto_info - Returns the version of the MySQL protocol used
mysqli_get_server_info - Returns the version of the MySQL server
mysqli_get_server_version - Returns the version of the MySQL server as an integer
mysqli_info - Retrieves information about the most recently executed query
mysqli_init - Initializes MySQLi and returns a resource for use with mysqli_real_connect()
mysqli_insert_id - Returns the auto generated id used in the last query
mysqli_kill - Asks the server to kill a MySQL thread
mysqli_master_query - Enforce execution of a query on the master in a master/slave setup
mysqli_more_results - Check if there any more query results from a multi query
mysqli_multi_query - Performs a query on the database
mysqli_next_result - Prepare next result from multi_query
mysqli_num_fields - Get the number of fields in a result
mysqli_num_rows - Gets the number of rows in a result
mysqli_options - Set options
mysqli_param_count - Alias for mysqli_stmt_param_count
mysqli_ping - Pings a server connection, or tries to reconnect if the connection has gone down
mysqli_prepare - Prepare a SQL statement for execution
mysqli_query - Performs a query on the database
mysqli_real_connect - Opens a connection to a mysql server
mysqli_real_escape_string - Escapes special characters in a string for use in a SQL statement, taking into account the current charset of the connection
mysqli_real_query - Execute an SQL query
mysqli_report - Enables or disables internal report functions
mysqli_rollback - Rolls back current transaction
mysqli_rpl_parse_enabled - Check if RPL parse is enabled
mysqli_rpl_probe - RPL probe
mysqli_rpl_query_type - Returns RPL query type
mysqli_select_db - Selects the default database for database queries
mysqli_send_long_data - Alias for mysqli_stmt_send_long_data
mysqli_send_query - Send the query and return
mysqli_server_end - Shut down the embedded server
mysqli_server_init - Initialize embedded server
mysqli_set_charset - Sets the default client character set
mysqli_set_opt - Alias of mysqli_options
mysqli_sqlstate - Returns the SQLSTATE error from previous MySQL operation
mysqli_ssl_set - Used for establishing secure connections using SSL
mysqli_stat - Gets the current system status
mysqli_stmt_affected_rows - Returns the total number of rows changed, deleted, or inserted by the last executed statement
mysqli_stmt_bind_param - Binds variables to a prepared statement as parameters
mysqli_stmt_bind_result - Binds variables to a prepared statement for result storage
mysqli_stmt_close - Closes a prepared statement
mysqli_stmt_data_seek - Seeks to an arbitray row in statement result set
mysqli_stmt_errno - Returns the error code for the most recent statement call
mysqli_stmt_error - Returns a string description for last statement error
mysqli_stmt_execute - Executes a prepared Query
mysqli_stmt_fetch - Fetch results from a prepared statement into the bound variables
mysqli_stmt_free_result - Frees stored result memory for the given statement handle
mysqli_stmt_init - Initializes a statement and returns an object for use with mysqli_stmt_prepare
mysqli_stmt_num_rows - Return the number of rows in statements result set
mysqli_stmt_param_count - Returns the number of parameter for the given statement
mysqli_stmt_prepare - Prepare a SQL statement for execution
mysqli_stmt_reset - Resets a prepared statement
mysqli_stmt_result_metadata - Returns result set metadata from a prepared statement
mysqli_stmt_send_long_data - Send data in blocks
mysqli_stmt_sqlstate - Returns SQLSTATE error from previous statement operation
mysqli_stmt_store_result - Transfers a result set from a prepared statement
mysqli_store_result - Transfers a result set from the last query
mysqli_thread_id - Returns the thread ID for the current connection
mysqli_thread_safe - Returns whether thread safety is given or not
mysqli_use_result - Initiate a result set retrieval
mysqli_warning_count - Returns the number of warnings from the last query for the given link

XCII. Ncurses

ncurses_addch - Add character at current position and advance cursor
ncurses_addchnstr - Add attributed string with specified length at current position
ncurses_addchstr - Add attributed string at current position
ncurses_addnstr - Add string with specified length at current position
ncurses_addstr - Output text at current position
ncurses_assume_default_colors - Define default colors for color 0
ncurses_attroff - Turn off the given attributes
ncurses_attron - Turn on the given attributes
ncurses_attrset - Set given attributes
ncurses_baudrate - Returns baudrate of terminal
ncurses_beep - Let the terminal beep
ncurses_bkgd - Set background property for terminal screen
ncurses_bkgdset - Control screen background
ncurses_border - Draw a border around the screen using attributed characters
ncurses_bottom_panel - Moves a visible panel to the bottom of the stack
ncurses_can_change_color - Check if we can change terminals colors
ncurses_cbreak - Switch of input buffering
ncurses_clear - Clear screen
ncurses_clrtobot - Clear screen from current position to bottom
ncurses_clrtoeol - Clear screen from current position to end of line
ncurses_color_content - Gets the RGB value for color
ncurses_color_set - Set fore- and background color
ncurses_curs_set - Set cursor state
ncurses_def_prog_mode - Saves terminals (program) mode
ncurses_def_shell_mode - Saves terminals (shell) mode
ncurses_define_key - Define a keycode
ncurses_del_panel - Remove panel from the stack and delete it (but not the associated window)
ncurses_delay_output - Delay output on terminal using padding characters
ncurses_delch - Delete character at current position, move rest of line left
ncurses_deleteln - Delete line at current position, move rest of screen up
ncurses_delwin - Delete a ncurses window
ncurses_doupdate - Write all prepared refreshes to terminal
ncurses_echo - Activate keyboard input echo
ncurses_echochar - Single character output including refresh
ncurses_end - Stop using ncurses, clean up the screen
ncurses_erase - Erase terminal screen
ncurses_erasechar - Returns current erase character
ncurses_filter - Set LINES for iniscr() and newterm() to 1
ncurses_flash - Flash terminal screen (visual bell)
ncurses_flushinp - Flush keyboard input buffer
ncurses_getch - Read a character from keyboard
ncurses_getmaxyx - Returns the size of a window
ncurses_getmouse - Reads mouse event
ncurses_getyx - Returns the current cursor position for a window
ncurses_halfdelay - Put terminal into halfdelay mode
ncurses_has_colors - Check if terminal has colors
ncurses_has_ic - Check for insert- and delete-capabilities
ncurses_has_il - Check for line insert- and delete-capabilities
ncurses_has_key - Check for presence of a function key on terminal keyboard
ncurses_hide_panel - Remove panel from the stack, making it invisible
ncurses_hline - Draw a horizontal line at current position using an attributed character and max. n characters long
ncurses_inch - Get character and attribute at current position
ncurses_init_color - Set new RGB value for color
ncurses_init_pair - Allocate a color pair
ncurses_init - Initialize ncurses
ncurses_insch - Insert character moving rest of line including character at current position
ncurses_insdelln - Insert lines before current line scrolling down (negative numbers delete and scroll up)
ncurses_insertln - Insert a line, move rest of screen down
ncurses_insstr - Insert string at current position, moving rest of line right
ncurses_instr - Reads string from terminal screen
ncurses_isendwin - Ncurses is in endwin mode, normal screen output may be performed
ncurses_keyok - Enable or disable a keycode
ncurses_keypad - Turns keypad on or off
ncurses_killchar - Returns current line kill character
ncurses_longname - Returns terminals description
ncurses_meta - Enables/Disable 8-bit meta key information
ncurses_mouse_trafo - Transforms coordinates
ncurses_mouseinterval - Set timeout for mouse button clicks
ncurses_mousemask - Sets mouse options
ncurses_move_panel - Moves a panel so that its upper-left corner is at [startx, starty]
ncurses_move - Move output position
ncurses_mvaddch - Move current position and add character
ncurses_mvaddchnstr - Move position and add attributed string with specified length
ncurses_mvaddchstr - Move position and add attributed string
ncurses_mvaddnstr - Move position and add string with specified length
ncurses_mvaddstr - Move position and add string
ncurses_mvcur - Move cursor immediately
ncurses_mvdelch - Move position and delete character, shift rest of line left
ncurses_mvgetch - Move position and get character at new position
ncurses_mvhline - Set new position and draw a horizontal line using an attributed character and max. n characters long
ncurses_mvinch - Move position and get attributed character at new position
ncurses_mvvline - Set new position and draw a vertical line using an attributed character and max. n characters long
ncurses_mvwaddstr - Add string at new position in window
ncurses_napms - Sleep
ncurses_new_panel - Create a new panel and associate it with window
ncurses_newpad - Creates a new pad (window)
ncurses_newwin - Create a new window
ncurses_nl - Translate newline and carriage return / line feed
ncurses_nocbreak - Switch terminal to cooked mode
ncurses_noecho - Switch off keyboard input echo
ncurses_nonl - Do not translate newline and carriage return / line feed
ncurses_noqiflush - Do not flush on signal characters
ncurses_noraw - Switch terminal out of raw mode
ncurses_pair_content - Gets the RGB value for color
ncurses_panel_above - Returns the panel above panel
ncurses_panel_below - Returns the panel below panel
ncurses_panel_window - Returns the window associated with panel
ncurses_pnoutrefresh - Copies a region from a pad into the virtual screen
ncurses_prefresh - Copies a region from a pad into the virtual screen
ncurses_putp - Apply padding information to the string and output it
ncurses_qiflush - Flush on signal characters
ncurses_raw - Switch terminal into raw mode
ncurses_refresh - Refresh screen
ncurses_replace_panel - Replaces the window associated with panel
ncurses_reset_prog_mode - Resets the prog mode saved by def_prog_mode
ncurses_reset_shell_mode - Resets the shell mode saved by def_shell_mode
ncurses_resetty - Restores saved terminal state
ncurses_savetty - Saves terminal state
ncurses_scr_dump - Dump screen content to file
ncurses_scr_init - Initialize screen from file dump
ncurses_scr_restore - Restore screen from file dump
ncurses_scr_set - Inherit screen from file dump
ncurses_scrl - Scroll window content up or down without changing current position
ncurses_show_panel - Places an invisible panel on top of the stack, making it visible
ncurses_slk_attr - Returns current soft label key attribute
ncurses_slk_attroff - Turn off the given attributes for soft function-key labels
ncurses_slk_attron - Turn on the given attributes for soft function-key labels
ncurses_slk_attrset - Set given attributes for soft function-key labels
ncurses_slk_clear - Clears soft labels from screen
ncurses_slk_color - Sets color for soft label keys
ncurses_slk_init - Initializes soft label key functions
ncurses_slk_noutrefresh - Copies soft label keys to virtual screen
ncurses_slk_refresh - Copies soft label keys to screen
ncurses_slk_restore - Restores soft label keys
ncurses_slk_set - Sets function key labels
ncurses_slk_touch - Forces output when ncurses_slk_noutrefresh is performed
ncurses_standend - Stop using 'standout' attribute
ncurses_standout - Start using 'standout' attribute
ncurses_start_color - Start using colors
ncurses_termattrs - Returns a logical OR of all attribute flags supported by terminal
ncurses_termname - Returns terminals (short)-name
ncurses_timeout - Set timeout for special key sequences
ncurses_top_panel - Moves a visible panel to the top of the stack
ncurses_typeahead - Specify different filedescriptor for typeahead checking
ncurses_ungetch - Put a character back into the input stream
ncurses_ungetmouse - Pushes mouse event to queue
ncurses_update_panels - Refreshes the virtual screen to reflect the relations between panels in the stack
ncurses_use_default_colors - Assign terminal default colors to color id -1
ncurses_use_env - Control use of environment information about terminal size
ncurses_use_extended_names - Control use of extended names in terminfo descriptions
ncurses_vidattr - Display the string on the terminal in the video attribute mode
ncurses_vline - Draw a vertical line at current position using an attributed character and max. n characters long
ncurses_waddch - Adds character at current position in a window and advance cursor
ncurses_waddstr - Outputs text at current postion in window
ncurses_wattroff - Turns off attributes for a window
ncurses_wattron - Turns on attributes for a window
ncurses_wattrset - Set the attributes for a window
ncurses_wborder - Draws a border around the window using attributed characters
ncurses_wclear - Clears window
ncurses_wcolor_set - Sets windows color pairings
ncurses_werase - Erase window contents
ncurses_wgetch - Reads a character from keyboard (window)
ncurses_whline - Draws a horizontal line in a window at current position using an attributed character and max. n characters long
ncurses_wmouse_trafo - Transforms window/stdscr coordinates
ncurses_wmove - Moves windows output position
ncurses_wnoutrefresh - Copies window to virtual screen
ncurses_wrefresh - Refresh window on terminal screen
ncurses_wstandend - End standout mode for a window
ncurses_wstandout - Enter standout mode for a window
ncurses_wvline - Draws a vertical line in a window at current position using an attributed character and max. n characters long

XCIII. Network

checkdnsrr - Check DNS records corresponding to a given Internet host name or IP address
closelog - Close connection to system logger
debugger_off - Disable internal PHP debugger (PHP 3)
debugger_on - Enable internal PHP debugger (PHP 3)
define_syslog_variables - Initializes all syslog related constants
dns_check_record - Synonym for checkdnsrr
dns_get_mx - Synonym for getmxrr
dns_get_record - Fetch DNS Resource Records associated with a hostname
fsockopen - Open Internet or Unix domain socket connection
gethostbyaddr - Get the Internet host name corresponding to a given IP address
gethostbyname - Get the IP address corresponding to a given Internet host name
gethostbynamel - Get a list of IP addresses corresponding to a given Internet host name
getmxrr - Get MX records corresponding to a given Internet host name
getprotobyname - Get protocol number associated with protocol name
getprotobynumber - Get protocol name associated with protocol number
getservbyname - Get port number associated with an Internet service and protocol
getservbyport - Get Internet service which corresponds to port and protocol
inet_ntop - Converts a packed internet address to a human readable representation
inet_pton - Converts a human readable IP address to its packed in_addr representation
ip2long - Converts a string containing an (IPv4) Internet Protocol dotted address into a proper address
long2ip - Converts an (IPv4) Internet network address into a string in Internet standard dotted format
openlog - Open connection to system logger
pfsockopen - Open persistent Internet or Unix domain socket connection
socket_get_status - 別名 stream_get_meta_data
socket_set_blocking - 別名 stream_set_blocking
socket_set_timeout - 別名 stream_set_timeout
syslog - Generate a system log message

XCIV. Newt

newt_bell - Send a beep to the terminal
newt_button_bar -
newt_button -
newt_centered_window - Open a centered window of the specified size
newt_checkbox_get_value -
newt_checkbox_set_flags -
newt_checkbox_set_value -
newt_checkbox_tree_add_item - *
newt_checkbox_tree_find_item -
newt_checkbox_tree_get_current -
newt_checkbox_tree_get_entry_value -
newt_checkbox_tree_get_multi_selection -
newt_checkbox_tree_get_selection -
newt_checkbox_tree_multi -
newt_checkbox_tree_set_current -
newt_checkbox_tree_set_entry_value -
newt_checkbox_tree_set_entry -
newt_checkbox_tree_set_width -
newt_checkbox_tree -
newt_checkbox -
newt_clear_key_buffer - Discards the contents of the terminal's input buffer without waiting for additional input
newt_cls -
newt_compact_button -
newt_component_add_callback -
newt_component_takes_focus -
newt_create_grid -
newt_cursor_off -
newt_cursor_on -
newt_delay -
newt_draw_form -
newt_draw_root_text - Displays the string text at the position indicated
newt_entry_get_value -
newt_entry_set_filter -
newt_entry_set_flags -
newt_entry_set -
newt_entry -
newt_finished - Uninitializes newt interface
newt_form_add_component - Adds a single component to the form
newt_form_add_components - Add several components to the form
newt_form_add_host_key -
newt_form_destroy - Destroys a form
newt_form_get_current -
newt_form_run - Runs a form
newt_form_set_background -
newt_form_set_height -
newt_form_set_size -
newt_form_set_timer -
newt_form_set_width -
newt_form_watch_fd -
newt_form - Create a form
newt_get_screen_size - Fills in the passed references with the current size of the terminal
newt_grid_add_components_to_form -
newt_grid_basic_window -
newt_grid_free -
newt_grid_get_size -
newt_grid_h_close_stacked -
newt_grid_h_stacked -
newt_grid_place -
newt_grid_set_field -
newt_grid_simple_window -
newt_grid_v_close_stacked -
newt_grid_v_stacked -
newt_grid_wrapped_window_at -
newt_grid_wrapped_window -
newt_init - Initialize newt
newt_label_set_text -
newt_label -
newt_listbox_append_entry -
newt_listbox_clear_selection -
newt_listbox_clear -
newt_listbox_delete_entry -
newt_listbox_get_current -
newt_listbox_get_selection -
newt_listbox_insert_entry -
newt_listbox_item_count -
newt_listbox_select_item -
newt_listbox_set_current_by_key -
newt_listbox_set_current -
newt_listbox_set_data -
newt_listbox_set_entry -
newt_listbox_set_width -
newt_listbox -
newt_listitem_get_data -
newt_listitem_set -
newt_listitem -
newt_open_window - Open a window of the specified size and position
newt_pop_help_line - Replaces the current help line with the one from the stack
newt_pop_window - Removes the top window from the display
newt_push_help_line - Saves the current help line on a stack, and displays the new line
newt_radio_get_current -
newt_radiobutton -
newt_redraw_help_line -
newt_reflow_text -
newt_refresh - Updates modified portions of the screen
newt_resize_screen -
newt_resume - Resume using the newt interface after calling newt_suspend
newt_run_form - Runs a form
newt_scale_set -
newt_scale -
newt_scrollbar_set -
newt_set_help_callback -
newt_set_suspend_callback - Set a callback function which gets invoked when user presses the suspend key
newt_suspend - Tells newt to return the terminal to its initial state
newt_texbox_set_text -
newt_textbox_get_num_lines -
newt_textbox_reflowed -
newt_textbox_set_height -
newt_textbox -
newt_vertical_scrollbar -
newt_wait_for_key - Doesn't return until a key has been press

目錄